This part of GB/T 25122 specifies the terms and definitions, service conditions, general characteristics and test methods of power electronic converters for rolling stock. This Part applies to power electronic converters for traction circuits and auxiliary circuits of rolling stock (electric locomotives, diesel locomotives, bullet trains, passenger cars and trailers, etc.). This section also applies to power electronic converters for other traction rolling stock (such as trams, subways, urban rail transit vehicles). This standard applies to the complete converter unit and its configuration, including: semiconductor device components; integrated cooling system; components of the intermediate DC link, including filters connected to the DC link; semiconductor drive unit (SDU) and related sensors; protection circuit. This standard does not apply to power converters that provide electrical control power to semiconductor drive units (SDU) and other equipment (such as sensors) related to the operation of the converter. The electronic control device of the converter, the sensor irrelevant to the semiconductor drive unit (SDU) and the printed board assembly of the semiconductor drive unit (SDU) shall comply with the provisions of GB/T 25119. This section does not apply to electric vehicles or low-voltage or low-power converters specified in GB/T 25119.
GB/T 25122.1-2010 Referenced Document
GB 4208 Degrees of protection provided by enclosure(IP code)
GB/T 1094.10-2003 Power transformers--Part10: Determination of sound levels
GB/T 16859 Terminal marking for valve device stacks and assemblies and for power convertor equipment
GB/T 25118 Railway applications.Electric equipment for rolling stock.Rules for power resistors of open construction
GB/T 25119 Railway applications—Electronic equipment used on rolling stock*, 2021-12-31 Update
GB/T 25120 Rail transit rolling stock traction transformers and reactors*, 2023-11-27 Update
GB/T 25121 Railway applications.Rolling stock equipment.Capacitors for power electronics
GB/T 25123.1 Electric traction—Rotating electrical machines for rail and road vehicles—Part 1: Machines others than electronic convertor-fed alternating current motors*, 2018-06-07 Update
GB/T 4207 Method for the determination of the proof and the comparative tracking indices of solid insulating materials*, 2022-07-11 Update
GB/T 5993 Fixed capacitors for use in electronic equipment Part 4:Sectional specification Aluminium electrolytic capacitors with solid and non-solid electrolyte
GB/T 6553 Electrical insulating materials used under severe ambient conditions.Test methods for evaluating resistance to tracking and erosion*, 2014-05-06 Update
GB/T 7354 High-voltage test techniques—Partial discharge measurements*, 2018-09-17 Update
GB/T 25122.1-2010 history
2018GB/T 25122.1-2018 Railway applications—Power converters installed on board rolling stock—Part 1: Characteristics and test methods
2010GB/T 25122.1-2010 Railway applications.Power convertors installed on board rolling stock.Part 1:Characteristics and test methods
GB/T 25122.1-2010 Railway applications.Power convertors installed on board rolling stock.Part 1:Characteristics and test methods has been changed from TB/T 2437-2006 Power convertors installed on board rolling stock-Characteristics and test methods.