GB/T 19889.8-2006 Acoustics. Measurement of sound insulation in buildings and of building elements. Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (English Version)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 19889.8-2006
Scope
This part of GB/T 19889 specifies a method for measuring the acoustic performance of floor surfaces used to reduce impact noise transmission. The purpose of this standard is to establish a method for determining the impact sound improvement of floor cladding under standard test conditions. This test method is limited to the physical measurement method using an artificial sound source (standard impactor) as a noise source under specified laboratory conditions, and does not involve the subjective meaning of the measurement results. This section is applicable to the measurement of various single-layer or multi-layer floor surface materials covered on standard floors. For multi-layer materials, it can be either prefabricated at the factory or assembled at the test site. This measurement method is only applicable to laboratory measurement, and does not involve any terms of on-site effect evaluation of floor cladding.
GB/T 19889.8-2006 Referenced Document
GB/T 19889.1-2005 Acoustics-Measurement of sound insulation in buildings and of building elements-Part 1:Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.2-2005 Acoustics-Measurement of sound insulation in buildings and of building elements-Part2:Determination,verification and application of precision data
GB/T 19889.6-2005 Acoustics-Measurement of sound insulation in buildings and of building elements-Part 6:Laboratory measurements of impact sound insulation of floors
GB/T 19889.7-2005 Acoustics-Measurement of sound insulation in buildings and of building elements-Part 7:Field measurements of impact sound insulation of floors
GB/T 3241-1998 Octave-band and fractional-octave-band filters
GB/T 19889.8-2006 history
2006GB/T 19889.8-2006 Acoustics. Measurement of sound insulation in buildings and of building elements. Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor