GB/T 14093.1-2009
Environmental technical requirements of machinery products for the warm-damp environments (English Version)

Standard No.

GB/T 14093.1-2009

Language

Chinese, Available in English version

Release Date

2009

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 14093.1-2009

Replace

GB/T 14093.1-1993

Scope

This part specifies the weather protection type and operating environment conditions, test methods, inspection rules, marking, packaging, transportation, storage and protection requirements of mechanical products used in hot and humid environments. If there are no provisions and explanations in this part, the relevant professional standards of the product shall be followed. This section applies to general-purpose mechanical products used in the "hot and humid" climate zone specified in GB/T 4797.1-2005. Product categories include agricultural machinery, internal combustion engines, construction machinery, mining machinery, heavy machinery, lifting and transportation machinery, petrochemical general machinery, electrical products, instruments and meters, machine tools, general parts and components, etc. For products used in places where the local climatic conditions comply with the provisions of this part, the technical requirements of this part may also apply. This section does not apply to products used in hot and humid areas where there are chemically corrosive media, explosive hazardous media, and special environmental conditions such as oceans, ships, and mines.

GB/T 14093.1-2009 Referenced Document

• GB 4208-2008 Degrees of protection provided by enclosure(IP code)
• GB/T 2423.16-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test J and guidance:Mould growth
• GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
• GB/T 2423.18-2000 Environmental testing-Part 2: Tests-Test Kb:Salt mist,cyclic(sodium chloride solution)
• GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.22-2002 Environmental testing for electric and electronic products--Part 2: Test methods Test N: Change of temperature
• GB/T 2423.24-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Sa: Simulated solar radiation at ground level
• GB/T 2423.3-2006 Environmental testing for electric and electronic products-Part 2:Tesing method-Test Cab：Damp heat,steady state
• GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
• GB/T 4768-2008 Mould-proof packaging
• GB/T 4797.1-2005 Environmental conditions appearing in nature of electric and electronic products Temperature and humidity
• GB/T 4798.1-2005 Environmental conditions existing in the application of electric and electronic products Section 1:Storage
• GB/T 4798.2-2008 Environmental conditions existing in the application of electric and electronic products.Part 2:Transportation
• GB/T 4798.3-2007 Environmental conditions existing in the application of electric and electronic products- Part 3: Stationary use at weather-protected locations
• GB/T 4798.4-2007 Environmental conditions existing in the application of electric and electronic products- Part 4: Stationary use at non-weather-protected locations

GB/T 14093.1-2009 history

• 2009 GB/T 14093.1-2009 Environmental technical requirements of machinery products for the warm-damp environments
• 1993 GB/T 14093.1-1993 Environmental technical requirements of machinery products for the warm-damp environments

GB/T 14093.1-2009 -All Parts