DIN 16961-2:2018
Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications

Standard No.

DIN 16961-2:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN 16961-2 E:2018-03

Latest

DIN 16961-2:2018-08

Replace

DIN 16961-2:2010

Scope

This part of the standard contains requirements, test methods and specifications concerning marking and testing for thermoplastics pipes and fittings with profiled wall and smooth pipe inside. It is apllicable to pipes with profiled wall and smooth pipe inside according to DIN 16961-1.

DIN 16961-2:2018 Referenced Document

• DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
• DIN 16917-2:2015 Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 2: Specifications for pipes and fittings
• DIN 16961-1:2018 Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions
• DIN 18200:2000 Assessment of conformity for construction products - Certification of construction products by certification body
• DIN 8061:2016 Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing; Text in German and English
• DIN 8075:2018 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
• DIN 8078:2008 Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing
• DIN EN 1295-1:1997 Structural design of buried pipelines under various conditions of loading - Part 1: General requirements; German version EN 1295-1:1997
• DIN EN 13476-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characterist
• DIN EN 13476-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth
• DIN EN 13476-3:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth
• DIN EN 1610:2015 Construction and testing of drains and sewers; German version EN 1610:2015
• DIN EN 580:2003 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT); German version EN 580:2003
• DIN EN 744:1995 Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock-method; German version EN 744:1995
• DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics
• DIN EN ISO 1163-1:1999 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995); German version EN ISO 1163-1:1999
• DIN EN ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); English version of DIN EN ISO 1167-1:2006-05
• DIN EN ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006); English version of DIN EN ISO 1167-2:2006-05
• DIN EN ISO 178:2013 Plastics - Determination of flexural properties (ISO 178:2010 + Amd.1:2013); German version EN ISO 178:2010 + A1:2013
• DIN EN ISO 1872-1:1999 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993); German version EN ISO 1872-1:1999
• DIN EN ISO 1873-1:1995 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995); German version EN ISO 1873-1:1995
• DIN EN ISO 2507-1:2018 Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
• DIN EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
• DIN EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
• DIN EN ISO 899-2:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015
• DIN EN ISO 9080:2013 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012); German and English version EN ISO 9080:2012

DIN 16961-2:2018 history

• 2018 DIN 16961-2:2018-08 Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
• 1970 DIN 16961-2 E:2018-03 Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
• 2018 DIN 16961-2:2018 Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
• 2010 DIN 16961-2:2010 Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
• 2000 DIN 16961-2:2000 Pipes and fittings of thermoplastics materials with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
• 1970 DIN 16961-2:1989 Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications