GB/T 8190.1-2010
Reciprocating internal combustion engines.Exhaust emission measurement.Part 1:Test-bed measurement of gaseous and particulate exhaust emissions (English Version)

Standard No.

GB/T 8190.1-2010

Language

Chinese, Available in English version

Release Date

2010

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2023-12

Replace By

GB/T 8190.1-2023

Latest

GB/T 8190.1-2023

Replace

GB/T 8190.1-1999

Scope

This part of GB/T 8190 specifies the test bench measurement and assessment method for gas and particulate emissions of reciprocating internal combustion engines under steady-state conditions, in order to determine the weighted value of each exhaust pollutant. Various combinations of engine load and RPM reflect different uses of the engine. This part applies to mobile transport and stationary reciprocating engines, but does not include vehicle engines mainly used for road travel. Under limited circumstances, the engine can be tested on the test bench according to the GB/T 8190.2 field test standard. But this can only be done by agreement between the parties involved. It should be admitted that the data obtained under these conditions may not be exactly the same as the data obtained in the previous or future tests according to this part of GB/T 8190. Therefore, it is suggested that this solution should only be selected for very limited output such as very large marine or generator set engines.

GB/T 8190.1-2010 Referenced Document

• GB/T 19000-2008 Quality management systems.Fundamentals and vocabulary
• GB/T 21404-2008 Internal combustion engine.Determination and method for the measurement of engine power.General requirements
• GB/T 21405-2008 Reciprocating internal combustion engines.Determination and method for the measurement of engine power.Additional requirements for exhaust emission tests in accordance with ISO 8178
• GB/T 6379.1-2004 Accuracy(trueness and precision)of measurement methods and results Part 1:General principles and definitions
• GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
• GB/T 8190.4 Measurement of emissions from reciprocating internal combustion engines - Part 4: Steady-state and transient test cycles for engines of different uses*， 2023-05-23 Update
• GB/T 8190.5-2005 Reciprocating internal combustion engines-Exhaust emission measurement-Part 5:Test fuels
• GB/T 8190.6-2006 Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test
• ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements
• SAE J1088-1993 (R) Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines, Recommended Practice February 1993
• SAE J1151-1991 (R) Methane Measurement Using Gas Chromatography

GB/T 8190.1-2010 history

• 2023 GB/T 8190.1-2023 Emission measurement of reciprocating internal combustion engines - Part 1: Test bench measurement systems for gaseous and particulate emissions
• 2010 GB/T 8190.1-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1:Test-bed measurement of gaseous and particulate exhaust emissions
• 1999 GB/T 8190.1-1999 Reciprocating internal combustion engines--Exhaust emission measurement--Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

GB/T 8190.1-2010 -All Parts