GB/T 8190.2-2011
Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site (English Version)

Standard No.

GB/T 8190.2-2011

Language

Chinese, Available in English version

Release Date

2011

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 8190.2-2011

Replace

GB/T 8190.2-1999

Scope

This part of GB/T 8190 specifies the methods for on-site testing and assessment of gas and particulate emissions from reciprocating internal combustion engines under steady-state and transient conditions. This standard applies to reciprocating internal combustion engines for off-road vehicles, marine power plants, generating sets, rail traction or similar purposes that require on-site measurements or are impossible to measure under test bench conditions and cannot use test bench measurement results. In-service inspection or recertification of remanufactured off-road engines is preferably tested off-vehicle at the loads for the intended use using a measuring device such as a dynamometer or load bank, but in-service compliance may require Test it on your vehicle. This method can be used for on-site compliance testing or certification of new production engines, in-service engines, or remanufactured engines, and for in-use compliance testing of off-road vehicles. This part can also be confirmed against the results of the test bench tested in GB/T 8190.4, but the difference between the engine operating parameters under laboratory conditions and field conditions and the accuracy of the emission measurement device under field conditions should be considered. For mechanical equipment engines with additional requirements (such as occupational health and safety regulations, power plant regulations, etc.), experimental conditions and special evaluation methods can be set separately.

GB/T 8190.2-2011 Referenced Document

• GB/T 21404-2008 Internal combustion engine.Determination and method for the measurement of engine power.General requirements
• GB/T 8190.1-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 1:Test-bed measurement of gaseous and particulate exhaust emissions
• GB/T 8190.11-2009 Reciprocating internal combustion engines-Exhaust emission measurement-Part11:Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
• GB/T 8190.4-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 4:Steady-state test cycles for different engine applications
• ISO 14396 Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
• ISO 8178-5 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels*， 2021-05-17 Update
• ISO 8178-6 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test*， 2018-04-01 Update
• ISO 9000 Quality management systems - Fundamentals and vocabulary [French version]*， 2015-09-15 Update

GB/T 8190.2-2011 history

• 2011 GB/T 8190.2-2011 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site
• 1999 GB/T 8190.2-1999 Reciprocating internal combustion engines Exhaust emission measurement--Part 2: Measurement of gaseous and particulate exhaust emissions at site

GB/T 8190.2-2011 -All Parts