JB/T 5275-2010
Specification for Y-W and Y-WF series outdoors and anticorrosion three-phase induction motor (frame size 80～355) (English Version)
- Standard No.
- JB/T 5275-2010
- Language
- Chinese, Available in English version
- Release Date
- 2010
- Published By
- Professional Standard - Machinery
- Status
- 2023-04
- Replace By
- JB/T 5275-2022
- Latest
- JB/T 5275-2022
- Replace
- JB/T 5275-1991
- Scope
- This standard specifies the type, basic parameters and dimensions, technical requirements, inspection rules, marking, packaging and warranty period requirements for outdoor and outdoor chemically resistant three-phase asynchronous motors (hereinafter referred to as motors). This standard is applicable to motors used outdoors and in outdoor chemical anti-corrosion environments. According to the severity of the chemical medium that they can withstand, the motors are divided into outdoor anti-light corrosion (Y-W) types and outdoor anti-moderate corrosion (Y-WFl) types. ) type and outdoor strong corrosion resistance (Y-WF2) type.
JB/T 5275-2010 Referenced Document
- GB 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher.Measurement,evaluation and limits of vibration severity
- GB 14711-2006 Safety requirements of small and medium size rotating electrical machines
- GB 1971-2006 Rotating electrical machines. Terminal markings and direction of rotation
- GB 755-2008 Rotating electrical machines.Rating and performance
- GB/T 10069.1-2006 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
- GB/T 1032-2005 Test procedures for three-phase induction motors
- GB/T 12351-2008 Environmental technical requirements of rotating electric machines for tropical use
- GB/T 191-2008 Packaging.Pictorial marking for handling of goods
- GB/T 1993-1993 Cooling methods for rotating electrical machines
- GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests A: Cold
- GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
- GB/T 4772.1-1999 Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
- GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification
- GB/T 997-2008 Rotating electrical machines.Classification of types of construction,mounting arrangements and terminal box position for(IM Code)
- JB/T 4375-1999 Environmental conditions required by electric products used in outdoor and indoor corrosive locations
- JB/T 9615.1 Test methods of the interturn insulation on random wound winding for AC low-voltage machines
- JB/T 9615.1-2000 Test methods of the interturn insulation on random wound winding for AC low-voltage machines
- JB/T 9615.2 Test Limits of the interturn insulation on random wound winding for AC low-voltage machines
JB/T 5275-2010 history
- 2022 JB/T 5275-2022 YE2-W, YE2-WF series outdoor and outdoor chemical corrosion-resistant three-phase asynchronous motor technical specifications (frame number 63 ~ 355)
- 2010 JB/T 5275-2010 Specification for Y-W and Y-WF series outdoors and anticorrosion three-phase induction motor (frame size 80～355)
- 1992 JB/T 5275-1991 Y-W series and Y-WF series outdoor and outdoor chemically corrosion resistant three-phase asynchronous motor. Technical specification (Frame size 80-315)
