GB 24160-2009 Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles (English Version)
This standard specifies the types and parameters, technical requirements, test methods, inspection rules, signs, coating, packaging, transportation, storage, etc. Require. This standard is applicable to the design and manufacture of wound gas cylinders with a nominal working pressure of 20 MPa or 25 MPa, a nominal water volume of 30 L~450 L, an operating temperature of -40°C~65°C, and a design service life of 15 years. Wound gas cylinders manufactured according to this standard are only used to fill compressed natural gas for vehicles in accordance with GB 18047, used as fuel for vehicles, and fixed on vehicles; the use conditions do not include additional loads caused by external forces, etc.
GB 24160-2009 Referenced Document
GB 15385 Method for hydraulic burst test of gas cylinders
GB 16918 Bursting discs specification for gas cylinder
GB 18047 compressed natural gas as vehicle fuel*, 2017-09-07 Update
GB 8335 Special threads for gas cylinders *, 2011-11-30 Update
GB/T 12137 Methods for leakage test of gas cylinders*, 2015-12-10 Update
GB/T 13005 Terminology of gas cylinders *, 2011-12-30 Update
GB/T 13298 Inspection methods of microstructure for metals
GB/T 1458 Test method for mechanical properties of fiber-wound reinforced composite ring specimens*, 2023-09-07 Update
GB/T 19466.2 Plastics-Differential scanning calorimetry(DSC)-Part 2:Determination of glass transition temperature
GB/T 19466.3 Plastics-Differential scanning calorimetry(DSC)-Part 3:Determination of temperature and enthalpy of melting and crystallization
GB/T 19466.4 Plastics—Differential scanning calorimetry (DSC)—Part 4: Determination of specific heat capacity*, 2016-10-13 Update
GB/T 19466.5 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion*, 2022-12-30 Update
GB/T 19466.6 Plastics.Differential scanning calorimetry(DSC).Part 6:Determination of oxidation induction time(isothermal OIT) and oxidation induction temperature (dynamic OIT)
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.1 Determination of carbon content in iron,steel and alloy
GB/T 223.10 Methods for chemical analysis of iron,steel and alloy The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
GB/T 223.11 Determination of chromium content in iron, steel and alloy by visual titration or potentiometric titration
GB/T 223.12 Methods for chemical analysis of iron,steel and alloy--The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.13 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.14 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.15 Chemical analysis of iron,steel and alloy--The determination of titanium by gravimetric method
GB/T 223.16 Methods for chemical analysis of iron,steel and alloy--The chromotropic acid photometric method for the determination of titanium content
GB/T 223.17 Methods for chemical analysis of iron,steel and alloy--The diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.18 Methods for chemical analysis of iron steel and alloy.The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.19 Methods for chemical analysis of iron,steel and alloy--The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.20 Methods for chemical analysis of iron steel and alloy.The Potentiometric titration method for the determination of cobalt content
GB/T 223.21 Methods for chemical analysis of iron steel and alloy.The 5-CL-PADAB spectrophotometric method for the determination of cobalt content
GB/T 223.22 Methods for chemical analysis of iron ,steel and alloy.The nitroso-R-salt spectrophotometric method for the determination of cobalt content
GB/T 223.23 Iron,,steel and alloy.Determination of nickel content.The dimethylglyoxime spectrophotometric method
GB/T 223.24 Methods for chemical analysis of iron, steel and alloy.The extraction seperation--The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.25 Methods for chemical analysis of iron, steel and alloy.The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26 Iron,steel and alloy.Determination of molybdenum content.The thiocyanate spectrophotometric method
GB/T 223.27 Methods for chemical analysis of iron, steel and alloy.The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
GB/T 223.28 Methods for chemical analysis of iron,steel and alloy--The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.29 Iron,steel and alloy.Determination of lead content.Carrier precipitation-xylenol orange spectrophotometric method
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy--The diantipyrylmethane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.30 Methods for chemical analysis of iron,steel and alloy. The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 223.31 Iron,steel and alloy.Determination of arsenic content.Distillation-molybdenum blue spectrophotometric method
GB/T 223.32 Methods for chemical analysis of iron,steel and alloy. The hypophosphite reduction-iodimetric method for the determination of arsenic content
GB/T 223.33 Methods for chemical analysis of iron,steel and alloy. The chlorophosphonazo mA photometric method for the determination of cerium content after extraction separation
GB/T 223.34 Methods for chemical analysis of iron,steel and alloy-The determination of hydrochloric acid-insoluble content of iron powders
GB/T 223.35 Methods for chemical analysis of iron,steel and alloy--The pulse heating inert gas fusion-coulometric titration method for the determination of oxygen content
GB/T 223.36 Methods for chemical analysis of iron, steel and alloy. The neutral titration method for the determinaion of nitrogen content after distillation separation
GB/T 223.37 Iron, steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation*, 2020-06-02 Update
GB/T 223.38 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.39 Methods for chemical analysis iron,steel and alloy. The sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.4 Alloyed steel.Determination of manganese content.Potentiometric or visual titration method
GB/T 223.40 Iron, steel and alloy Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.41 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
GB/T 223.42 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalum content
GB/T 223.43 Iron,steel and alloy.Determination of tungsten content.Gravimetric method and spectrophotometric method
GB/T 223.45 Methods for chemical analysis of iron,steel and alloy. The cupral Separation-xylidyl blue Ⅱphotometric method for the determination of magnesium content
GB/T 223.46 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrometric method for the determination of magnesium content
GB/T 223.47 Methods for chemical analysis of iron,steel and alloy. The carrier precipitation-molybdenum blue potometric method for the determination of antimony content
GB/T 223.48 Methods for chemical analysis of iron,steel and alloy--The semixylenol orange photometric method for the determination of bismuth content
GB/T 223.49 Methods for chemical analysis of iron,steel and alloy. Extraction separation-chlorophosphonazo mA spectrophotometric method for the determination of the total rare tarth content
GB/T 223.5 Steel and iron.Determination of acid-soluble silicon and total silicon content.Reduced molybdosilicate spectrophotometric method
GB/T 223.50 Methods for chemical analysis of iron, steel and alloy. The phenylfluorone-CTMAB direct photometric method for the determination of tin content
GB/T 223.51 Methods for chemical analysis of iron,steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content
GB/T 223.52 Methods for chemical analysis of iron,steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content
GB/T 223.53 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
GB/T 223.54 Iron, steel and alloy—Determination of nickel content—Flame atomic absorption spectrometric method*, 2022-07-11 Update
GB/T 223.55 Iron, steel and alloy. Determination of tellurium content. Oscillo-polarographic method
GB/T 223.56 Methods for chemical analysis of iron,steel and alloy--The sulfhydryl cotton fiber separation-oscillopolarographic method for the determination of tellurium content
GB/T 223.57 Methods for chemical analysis of iron,steel and alloy--The extraction-absorption catalytic polarographic method for the determination of cadmium content
GB/T 223.58 Methods for chemical analysis of iron,steel and alloy--The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content
GB/T 223.59 Iron,steel and alloy.Determination of phosphorus content.Bismuth phosphomolybdate blue spectrophotometic method and antimony phosphomolybdate blue spectruophotometric method
GB/T 223.6 Methods for chemical analysis of iron,steel and alloy. The neutralization titrimetric method for the determination of boron content
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy--The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Iron, steel and alloy—Determination of manganese content—Sodium (potassium) periodate spectrophotometric method*, 2022-07-11 Update
GB/T 223.64 Iron,steel and alloy.Determination of manganese content.Flame atomic absorption spectrometric method
GB/T 223.65 Steel, iron and alloy.Determination of cobalt content.Flame atomic absorption spectrometric method*, 2012-12-31 Update
GB/T 223.66 Methods for chemical analysis of iron,steel and alloy--The thiocyanate-chlorpromazine hydrochloride-chloroform extraction photometric method for the determination of tungsten content
GB/T 223.67 Iron,steel and alloy.Determination of sulfur content.Methylene blue spectrophotometric method
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy. The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69 Iron,steel and alloy.Determination of carbon contents.Gas-volumetric method after combustion in the pipe furnace
GB/T 223.7 Iron powder--Determination of iron content--Potassium dichromate titration method
GB/T 223.70 Iron,steel and alloy.Determination of iron contents. o-Phenanthroline spectrophotometric method
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy. The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.72 Iron,steel and alloy.Determination of sulfur content.Gravimetric method
GB/T 223.73 Iron,steel and alloy.Determination of iron contents. Titanium trichloride-potassium dichromate titration method
GB/T 223.74 Methods for chemical analysis of iron, steel and alloy. The combustion gravimetric/gas-volumetric method for the determination of combined carbon content
GB/T 223.75 Iron,steel and alloy.Determination of boron content. Methanol distillation-curcumin photometric method
GB/T 223.76 Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of vanadium content
GB/T 223.77 Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of calcium content
GB/T 223.78 Methods for chemical analysis of iron,steel and alloy-Curcumin spectrophotometric method for the determination of boron content
GB/T 223.79 Iron and steel-Determination of multi-element contents-X-ray fluorescence spectrometry (Routine method)
GB/T 223.8 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation-EDTA titration method for the determination of aluminium content
GB/T 223.80 Iron,steel and alloy-Determination of trace bismuth and arsenic contents- Hydride generation-atomic fluorescence spectrometric method
GB/T 223.81 Iron,steel and alloy-Determination of total aluminum and total aluminum and total boron contents-Microwave digestion-inductively coupled plasma mass spectrometric method
GB/T 223.82 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas*, 2018-05-14 Update
GB/T 223.83 Steel and iron.Determination of high sulfur content.Infrared absorption method after combustion in an induction furnace*, 2009-10-30 Update
GB/T 223.84 Steel and iron.Determination of titanium content.Diantipyrylmethane spectrophotometric method*, 2009-10-30 Update
GB/T 223.85 Steel and iron.Determination of sulfur content.Infrared absorption method after combustion in an induction furnace*, 2009-10-30 Update
GB/T 223.86 Steel and iron.Determination of total carbon content.Infrared absorption method after combustion in an induction furnace*, 2009-10-30 Update
GB/T 223.87 Iron, steel and alloy.Determination of calcium and magnesium.Inductively coupled plasma mass spectrometric method*, 2018-05-14 Update
GB/T 223.88 Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method*, 2019-06-04 Update
GB/T 223.89 Iron, steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method*, 2019-08-30 Update
GB/T 223.9 Iron,steel and alloy.Determination of aluminium content.Chrome azurol S photometric method
GB/T 223.90 Iron, steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method*, 2021-08-20 Update
GB/T 223.91 Iron, steel and alloy—Determination of copper—2,2’-Biquinoline spectrophotometric method*, 2021-08-20 Update
GB/T 224 Determination of the depth of decarburization of steels*, 2019-06-04 Update
GB/T 226 Test method for macrostructure and defect of steel by etching*, 2015-09-11 Update
GB/T 228 Metallic materials--Tensile testing at ambient temperature
GB/T 229 Metallic materials—Charpy pendulum impact test method*, 2020-09-29 Update
GB/T 232 Metallic materials - Bend test methods*, 2024-03-15 Update
GB/T 2578 Fabrication method of ring test specimen for filament-winding reinforced plastics
GB/T 3362 Modification No. 1 of Test Method for Tensile Properties of Carbon Fiber Multifilament
GB/T 4336 Determination of multi-element content in carbon steel and medium and low alloy steel Spark discharge atomic emission spectrometry (conventional method) Amendment No. 1
GB/T 4612 Plastics.Epoxy compounds.Determination of epoxy equivalent
GB/T 5777 Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections*, 2019-06-04 Update
GB/T 7690.1 Reinforcements.Test method for yarns.Part 1:Determination of linear density*, 2013-11-27 Update
GB/T 7690.3 Reinforcements.Test method for yarns.Part 3:Determination of breaking force and breaking elongation for glass fibre*, 2013-11-27 Update
GB/T 8336 Special thread gauges for gas cylinders *, 2011-12-30 Update
GB/T 9251 Methods for hydrostatic test of gas cylinders*, 2022-03-09 Update
GB/T 9252 Method for pressure cycling test of gas cylinders*, 2017-10-14 Update
GB 24160-2009 history
2022GB/T 24160-2022 Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles
2009GB 24160-2009 Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles