This standard specifies the special requirements for ballasts for fluorescent lamps (excluding resistive ballasts) for 50 Hz or 60 Hz AC power supply below 1000 V. The matching fluorescent lamps may be with or without preheated cathodes, and may work with or without a starter. The rated power, size and characteristics of these lamps shall comply with the requirements in IEC 60081 and IEC 60901. Regulation. This section applies to complete ballasts and their components, such as: reactors, transformers and capacitors. Special requirements for thermally protected ballasts are given in Appendix 8. This part refers to the ballasts used for lamps that work normally at the grid frequency, excluding AC electronic ballasts that work at high frequencies. For the requirements of the ballasts, see GB 19510.4. Refer to GB l8489 and IEC 61049 for the requirements of capacitors with a capacitance value greater than 0.1 tLF. See IEC 60384-14 for requirements for capacitors with a capacitance value less than or equal to 0.1 mmF. Performance requirements are given in IEC 60921.
GB 19510.9-2004 history
2009GB 19510.9-2009 Lamp controlgear-Part 9:Particular requirements for ballasts for fluorescent lamps
2004GB 19510.9-2004 Lamp controlgear-Part 9:Particular requirements for ballasts for fluorescent lamps
1993GB 2313-1993 Ballasts for tubular fluorescent lamps general and safety reduirements
GB 19510.9-2004 Lamp controlgear-Part 9:Particular requirements for ballasts for fluorescent lamps has been changed from GB 2313-1993 Ballasts for tubular fluorescent lamps general and safety reduirements.