GB/T 3478.2-2008
Straight cylindrical involute splines.Metric module, side fit.Part 2: 30°pressure angle dimensions tables (English Version)

Standard No.: GB/T 3478.2-2008
Language: Chinese, Available in English version
Release Date: 2008
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest: GB/T 3478.2-2008
Replace: GB/T 3478.2-1995

Scope: This part of GB/T 3478 specifies all splines required for cylindrical spur involute splines with 30° standard pressure angle flat root and rounded root (hereinafter referred to as 30° flat root and 30° round root). key size. This part applies to involute splines with a pressure angle of 30°, a modulus of 0.5 mm to 10 mm, and side fits specified in the GB/T 3478.1-2008 standard. The size table of this part is compiled according to the calculation formula in Table 3 of GB/T 3478.1-2008 and the tooth side fit is H/h, and the basic inspection method is used.

GB/T 3478.2-2008 Referenced Document

GB/T 1800.1 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits*， 2020-04-28 Update
GB/T 3478.1-2008 Straight cylindrical involute splines.Metric module,side fit.Part 1:Generalities

2008 GB/T 3478.2-2008 Straight cylindrical involute splines.Metric module, side fit.Part 2: 30°pressure angle dimensions tables
1995 GB/T 3478.2-1995 Straight cylindrical involute splines--30°pressure angle dimensions tables