GB/T 21868.3-2008 Pigments and extenders.Methods of dispersion for assessment of dispersion characteristics.Part 3:Dispersion using a high-speed impeller mill (English Version)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 21868.3-2008
Scope
This standard specifies the method of dispersing pigments and extenders with a high-speed mixer. This section is to be used in conjunction with the evaluation method described in GB/T 21867, using an agreed paint base system. This part should be read together with GB/T 21868.1-2008. The method is limited to millbases with suitably high viscosities, since high shear forces can only be generated with high binder contents and/or high pigment concentrations. This is not meant to provide a way to scale the millbase (scaling up this process from laboratory equipment to factory grinders is not trivial). Note: The high-speed mixer can be used to directly disperse the pigment, or to pre-disperse, and then use other equipment to further disperse, such as sand mill (bead mill) or vertical ball mill.
GB/T 21868.3-2008 Referenced Document
GB/T 21867.1-2008 Pigments and extenders.Methods of assessment of dispersion characteristics.Part 1:Assessment from the change in tinting strength of coloured pigments
GB/T 21867.2-2008 Pigments and extenders.Methods of assessment of dispersion characteristics.Part 2:Assessment from the change in fineness of grind
GB/T 21867.3-2008 Pigments and extenders.Methods of assessment of dispersion characteristics.Part 3:Assessment from the change in gloss
GB/T 21868.1-2008 Pigments and extenders.Methods of dispersion for assessment of dispersion characteristics.Part 1:Introduction
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes. Sampling
GB/T 21868.3-2008 history
2008GB/T 21868.3-2008 Pigments and extenders.Methods of dispersion for assessment of dispersion characteristics.Part 3:Dispersion using a high-speed impeller mill