AQ 1032-2007
Safety inspection code of JTK winder for coal mines (English Version)

Standard No.

AQ 1032-2007

Language

Chinese, Available in English version

Release Date

2007

Published By

Professional Standard-Safe Production

Latest

AQ 1032-2007

Scope

This standard specifies the product classification, inspection requirements, inspection content, inspection methods, and inspection rules of the JTK type lifting winch (hereinafter referred to as the winch) for coal mines. This standard is applicable to winches with a drum diameter of 1.2m and above, which are mainly used in inclined tunnels and small shafts on the surface of coal mines or underground for lifting materials and personnel. It is suitable for winches with a drum diameter of 0.8m, which are mainly used for auxiliary work on the surface of coal mines or underground. The permanent or mobile winch and drum with a diameter of 1m are mainly used for lifting materials on the surface of coal mines or underground.

AQ 1032-2007 Referenced Document

• GB 2894 Safety signs and guideline for the use*， 2008-12-11 Update
• GB 3836.1 Explosive atmospheres.Part 1:Equipment.General requirements*， 2010-08-09 Update
• GB 3836.2 Explosive atmospheres.Part 2:Equipment protection by flameproof enclosures "d"*， 2010-08-09 Update
• GB 3836.4 Explosive atmospheres.Part 4:Equipment protection by intrinsic safety "i"*， 2010-08-09 Update
• GB 9969.1 General principles for preparation of instructions for use of industrial products
• GB/T 11345-1989 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
• GB/T 13306 Plates*， 2011-05-12 Update
• GB/T 13325 Noise emitted by machinery and equipment--Guidelines for the preparation of test codes of engineering grade requring noise measurements at the operator's or bystander's position
• GB/T 15706.2 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles*， 2007-03-02 Update
• GB/T 16855.1 Safety-related components of machinery safety control systems Part 1: General principles for design*， 2019-07-01 Update
• GB/T 699 Quality carbon structure steels*， 2015-12-10 Update
• GB/T 7679.3-2005 Mining machinery terminology.Part 3:Winding equipment
• JB 8516-1997 Safety requirements for mine hoists and mine hoisting winches
• JB/T 1581 Ultrasonic testing method for rotor and shaft forgings of steam turbine and turbine generator*， 2014-07-09 Update
• JB/T 3277-2004 Hydraulic station for mine hoists and mine hoisting winches - Hydraulic pressure station
• JB/T 4263 Technical conditions for electric control equipment of AC drive mine hoist*， 2020-04-16 Update
• JB/T 6754.1-1993 DC electrically control equipment on shaft hoist - Part 1: Unit electrically control equipment
• JB/T 6754.2-1993 DC electrically control equipment on shaft hoist - Part 2: Electrically control equipment of thyristor
• MT/T 154.8 Coal Mine Auxiliary Transportation Equipment Model Compilation Method
• MT/T 776 Specification for routine inspection of coal mining machine-hydraulic system assembly

AQ 1032-2007 history

• 2007 AQ 1032-2007 Safety inspection code of JTK winder for coal mines