GB 20651.1-2006
Reciprocating internal combustion engines Safety Part 1: Compression ignition engines (English Version)
- Standard No.
- GB 20651.1-2006
- Language
- Chinese, Available in English version
- Release Date
- 2006
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2019-07
- Replace By
- GB/T 20651.1-2018
- Latest
- GB/T 20651.1-2018
- Replace
- JB 8890-1999
- Scope
- This part specifies the safety requirements for land, underground and water compression ignition engines and their basic auxiliary equipment. Except for engines used to drive road vehicles and aircraft. This section does not include special requirements for use in potentially explosive atmospheres. The engine mentioned in this section refers to the prime mover up to the power output end. Hazards associated with compression ignition engines are listed in Appendix A. This part specifies the special safety requirements for compression ignition engines based on the general requirements set forth in GB/T 15706.1-1995 and GB/T 15706.2-1995. Other standards such as compression ignition engines should refer to this part.
GB 20651.1-2006 Referenced Document
- GB 4556-2001 Reciprocating internal combustion engines--Fire protection
- GB/T 1859-2000 Reciprocating internal combustion engines-Measurement of emitted airborne noise-Engineering method and survey method
- GB/T 1883.1-2005 Reciprocating internal combustion engines.Vocabulary.Part 1: Terms for engine design and operation
- GB/T 1883.2-2005 Reciprocating internal combustion engines.Vocabulary.Part 2: Terms for engine maintenance
- GB/T 4025-2003 Basic and safety principles for man-machine interface,marking and identification Coding principles for indication devices and actuators
- GB/T 4672-2003 Reciprocating internal combustion engines--Hand-operated control devices--Standard direction of motion
- GB/T 4942.1-2001 Classification of degrees of protection provided by enclosures of rotating electrical machines (IP code)
- GB/T 6072.1-2000 Reciprocating internal combustion engines-Performance-Part 1:Standard reference conditions,declarations of power,fuel and lubricating oil consumptions,and test methods
- GB/T 6809.3-2006 Reciprocating internal combustion engines Vocabulary of components and systems Part 3: Main running gear*， 2006-12-28 Update
- GB/T 6809.4-1989 Reciprocating internal combustion engines--Terminology of components pressure-charging and air/exhaust gas ducting systems
- GB/T 6809.8-2000 Reciprocating internal combustion engines-Vocabulary of components and systems-Part 8:Starting systems
- GB/T 8190.1 Emission measurement of reciprocating internal combustion engines - Part 1: Test bench measurement systems for gaseous and particulate emissions*， 2023-05-23 Update
- GB/T 8190.1-1999 Reciprocating internal combustion engines--Exhaust emission measurement--Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
- GB/T 8190.10 Reciprocating internal combustion engines.Exhaust emission measurement.Part 10:Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions*， 2010-11-10 Update
- GB/T 8190.11 Reciprocating internal combustion engines-Exhaust emission measurement-Part11:Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions*， 2009-03-19 Update
- GB/T 8190.2 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site*， 2011-06-16 Update
- GB/T 8190.2-1999 Reciprocating internal combustion engines Exhaust emission measurement--Part 2: Measurement of gaseous and particulate exhaust emissions at site
- GB/T 8190.3 Reciprocating internal combustion engines--Exhaust emission measurement--Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
- GB/T 8190.4 Measurement of emissions from reciprocating internal combustion engines - Part 4: Steady-state and transient test cycles for engines of different uses*， 2023-05-23 Update
- GB/T 8190.5 Reciprocating internal combustion engines—Exhaust emission measurement—Part 5：Test fuels*， 2019-10-18 Update
- GB/T 8190.6 Reciprocating internal combustion engines—Exhaust emission measurement—Part 6: Report of measuring results and test*， 2022-10-14 Update
- GB/T 8190.7 Reciprocating internal combustion engines—Exhaust emission measurement—Part 7：Engine family determination*， 2018-02-06 Update
- GB/T 8190.8 Reciprocating internal combustion engines—Exhaust emission measurement—Part 8：Engine group determination*， 2018-12-28 Update
- GB/T 8190.9 Reciprocating internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions*， 2017-07-12 Update
GB 20651.1-2006 history
- 2018 GB/T 20651.1-2018 Reciprocating internal combustion engines—Safety—Part 1: Compression ignition engines
- 2006 GB 20651.1-2006 Reciprocating internal combustion engines Safety Part 1: Compression ignition engines
GB 20651.1-2006 Reciprocating internal combustion engines Safety Part 1: Compression ignition engines has been changed from JB 8890-1999 Reciprocating internal combustion engines.Safety requirements.
GB 20651.1-2006 Reciprocating internal combustion engines Safety Part 1: Compression ignition engines was changed to GB/T 20651.1-2018 Reciprocating internal combustion engines—Safety—Part 1: Compression ignition engines.
