GB/T 13951-2016
General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations (English Version)

Standard No.

GB/T 13951-2016

Language

Chinese, Available in English version

Release Date

2016

Published By

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Latest

GB/T 13951-2016

Replace

GB/T 13951-1992

Scope

This standard specifies the environmental test items, test methods and severity levels required for electrical and electronic products installed in different locations on mobile platforms and offshore installations (hereinafter referred to as "platforms"). This standard is applicable to the selection of environmental test items, test methods and severity levels when formulating technical conditions for electrical and electronic products for platform use. The relevant test rules and assessment indicators are stipulated in the product technical conditions. The general requirements for environmental testing of electrical and electronic products for single point mooring devices and offshore floating devices can refer to this standard.

GB/T 13951-2016 Referenced Document

• GB 3836.1 Explosive atmospheres.Part 1:Equipment.General requirements
• GB 3836.10 Electrical apparatus for explosive atmospheres--Hermetically sealed electrical apparatus "h"
• GB 3836.11 Explosive atmospheres.Part11:Equipment protection by flameproof enclosures"d"method of test for ascertainment of maximum experimental safe gap
• GB 3836.12 Explosive atmospheres.Part 12:Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current
• GB 3836.13 Explosive atmospheres.Part 13:Equipment repair, overhaul and reclamation
• GB 3836.14 Explosive atmospheres.Part 14:Classification of areas.Explosive gas atmosphere
• GB 3836.15 Electrical apparatus for explosive gas atmospheres. Part 15: Electrical installation in hazardous areas (other than mines)
• GB 3836.16 Electrical apparatus for explosive gas atmospheres.Part 16:Inspection and maintenance of electrical installation(other than mines)
• GB 3836.17 Electrical apparatus for explosive gas atmosphere Part 17: Construction and use of rooms or buildings protected by pressurization
• GB 3836.18 Explosive atmospheres.Part 18:Intrinsically safe system
• GB 3836.19 Explosive atmospheres.Part 19:Fieldbus intrinsically safe concept (FISCO)
• GB 3836.2 Explosive atmospheres.Part 2:Equipment protection by flameproof enclosures "d"
• GB 3836.20 Explosive atmospheres.Part 20:Equipment with equipment protection level(EPL)Ga
• GB 3836.3 Explosive atmospheres.Part 3:Equipment protection by increased safety "e"
• GB 3836.4 Explosive atmospheres.Part 4:Equipment protection by intrinsic safety "i"
• GB 3836.5 Electrical apparatus for explosive gas atmosphere-Part 5:Pressurized enclosures"p"
• GB 3836.6 Electrical apparatus for explosive gas atmospheres-Part 6:Oil-immersion"o"
• GB 3836.7 Electrical apparatus for explosive gas atmospheres-Part 7:Power filling"q"
• GB 3836.8 Explosive atmospheres.Part 8: Equipment protection by type of protection “n”
• GB 3836.9 Explosive atmospheres.Part 9:Equipment protection by type of protection "m"
• GB 4208 Degrees of protection provided by enclosure(IP code)
• GB/T 2421.1 Environmental testing for electric and electronic products.General and guidance
• GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.10 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)*， 2019-06-04 Update
• GB/T 2423.101 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings
• GB/T 2423.16 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth*， 2022-07-11 Update
• GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
• GB/T 2423.18 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution）*， 2021-05-21 Update
• GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature
• GB/T 2423.24 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering*， 2022-07-11 Update
• GB/T 2423.3 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state
• GB/T 2423.33 Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid*， 2021-05-21 Update
• GB/T 2423.4 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
• GB/T 2423.5 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock*， 2019-05-10 Update
• GB/T 2423.6 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
• GB/T 4942.1 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification

GB/T 13951-2016 history

• 2016 GB/T 13951-2016 General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations
• 1992 GB/T 13951-1992 General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations