DIN EN ISO 20557-2:2018
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018); German version EN ISO 20557-2:2018

Standard No.

DIN EN ISO 20557-2:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 20557-2:2018-12

Latest

DIN EN ISO 20557-2:2018-12

Replace

DIN EN ISO 15103-2:2007 DIN EN ISO 20557-2:2015

Scope

This part of the standard specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of poly(phenylene ether) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given here. Procedures and conditions are described for the preparation of test specimens, and procedures for measuring properties of the materials from which these specimens are made are given. Properties and test methods which are suitable and necessary to characterize poly(phenylene ether) moulding and extrusion materials are listed.

DIN EN ISO 20557-2:2018 Referenced Document

• DIN EN 60112:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009); German version EN 60112:2003 + A1:2009
• DIN EN 60243-1:2014 Electric strength of insulating materials.Test methods.Part 1: Tests at power frequencies (IEC 60243-1:2013); German version EN 60243-1:2013
• DIN EN 60296:2012 Fluids for electrotechnical applications.Unused mineral insulating oils for transformers and switchgear (IEC 60296:2012); German version EN 60296:2012
• DIN EN 60695-11-10:2014 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods (IEC 60695-11-10:2013); German version EN 60695-11-10:2013
• DIN EN ISO 10350-1:2018 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
• DIN EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011); German version EN ISO 1133-1:2011
• DIN EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
• DIN EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012); German version EN ISO 1183-1:2012
• DIN EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004); German version EN ISO 1183-2:2004
• DIN EN ISO 1183-3:2000 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999
• DIN EN ISO 15512:2017 Plastics - Determination of water content (ISO 15512:2016); German version EN ISO 15512:2016
• DIN EN ISO 178:2013 Plastics - Determination of flexural properties (ISO 178:2010 + Amd.1:2013); German version EN ISO 178:2010 + A1:2013
• DIN EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010
• DIN EN ISO 180:2013 Plastics - Determination of Izod impact strength (ISO 180:2000 + Amd.1:2006 + Amd.2:2013); German version EN ISO 180:2000 + A1:2006 + A2:2013
• DIN EN ISO 20753:2014 Plastics - Test specimens (ISO 20753:2008); German version EN ISO 20753:2014
• DIN EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017); German version EN ISO 294-1:2017
• DIN EN ISO 3451-1:2008 Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008); English version of DIN EN ISO 3451-1:2008-11
• DIN EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012); German version EN ISO 527-2:2012
• DIN EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008); German version EN ISO 62:2008
• DIN EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013); German version EN ISO 75-2:2013
• DIN IEC 60093:1993 Methods of test for insulating materials for electrical purposes; volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980); German version HD 429 S1:1983
• IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
• IEC 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials*， 2020-10-28 Update

DIN EN ISO 20557-2:2018 history

• 2018 DIN EN ISO 20557-2:2018-12 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018); German version EN ISO 20557-2:2018
• 2018 DIN EN ISO 20557-2:2018 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018); German version EN ISO 20557-2:2018
• 1970 DIN EN ISO 20557-2 E:2015-10 Plastic polyphenylene ether (draft)
• 2015 DIN EN ISO 20557-2 E:2015 Draft Document - Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO/DIS 20557-2:2015); German and English version prEN ISO 20557-2:2015
• 2007 DIN EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007); English version of DIN EN ISO 15103-2:2007-09
• 0000 DIN EN ISO 15103-2:2006
• 0000 DIN EN ISO 15103-2:2004

DIN EN ISO 20557-2:2018 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018); German version EN ISO 20557-2:2018 has been changed from DIN EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007); English version of DIN EN ISO 15103-2:2007-09.