This European Standard specifies the general safety and quality requirements and test methods for domestic mini-pools. These requirements and test methods are applicable to mini-pool structures, including their installation and possible means of access. This European Standard does not apply to: - pools for public use covered by EN 15288-1; - swimming pools for domestic use covered by EN 16582 series; - spas for domestic or public use; - paddling pools according to EN 71-8
EN 16927:2017 Referenced Document
DIN 18202:2013 Tolerances in building construction - Buildings
EN 13451-1:2011 Swimming pool equipment - Part 1: General safety requirements and test methods
EN 15288-1:2008 Swimming pools - Part 1: Safety requirements for design (Incorporates Amendment A1: 2010)
EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
EN 16713-3:2016 Domestic swimming pools - Water systems - Part 3: Water treatment - Requirements
EN 1875-3:1997 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method
EN 335:2013 Durability of wood and wood-based products - Use classes: definitions@ application to solid wood and wood-based products
EN 350:2016 Durability of wood and woodbased products - Testing and classification of the durability to biological agents of wood and wood-based materials
EN 351-1:2007 Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
EN 460:1994 Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties (Incorporates Amendment A1: 2018)
EN 71-8:2011 Safety of toys - Part 8: Activity toys for domestic use
EN ISO 1421:2016 Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
EN ISO 2411:2000 Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)
EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects@ and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects@ and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
EN ISO 4674-2:1998 Rubber- or Plastics-Coated Fabrics - Determination of Tear Resistance - Part 2: Ballistic Pendulum Method
EN ISO 9227:2012 Corrosion tests in artificial atmospheres - Salt spray tests
ISO 20712-1:2008 Water safety signs and beach safety flags - Part 1: Specifications for water safety signs used in workplaces and public areas
EN 16927:2017 history
2017EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools