EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
This European Standard specifies the visual, dimensional, mechanical and durability characteristics of plasticized poly(vinyl chloride) (PVC-P) homogenous membranes of nominal thickness greater than or equal to 0,75 mm for use as liners for inground swimming pools. It also specifies the characteristics of the composition of the PVC-P used to produce the membranes. It applies specifically to homogenous membranes intended for use in swimming pools where the water temperature is less than or equal to 28 ℃. If the membrane manufacturer permits a temperature of water continuously maintained above 28 ℃,This document also applies.
EN 15836-1:2010 Referenced Document
EN 1107-2 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
EN 12310-2 Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing
EN 12316-2 Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing*, 2013-06-01 Update
EN 12317-2 Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing*, 2010-07-01 Update
EN 1848-2 Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing
EN 1849-2 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets*, 2024-04-19 Update
EN 1850-2 Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing
EN 20105-A02 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
EN 438-2:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties
EN 495-5 Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing*, 2013-05-01 Update
EN ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)*, 2019-04-03 Update
EN ISO 175:2000 Plastics - Methods of Test for the Determination of the Effects of Immersion in Liquid Chemicals
EN ISO 291 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
EN ISO 4892-2:2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps Incorporates Amendment A1: 2009
EN ISO 527-1 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)*, 2019-09-18 Update
EN ISO 527-3 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets*, 2018-12-01 Update
EN ISO 5470-1:1999 Rubber- or Plastics-Coated Fabrics - Determination of Abrasion Resistance - Part 1: Taber Abrader
EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008)
EN ISO 846:1997 Plastics - Evaluation of the Action of Microorganisms ISO 846: 1997
EN 15836-1:2010 history
2010EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm