EN 12316-2:2013 Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
This European Standard specifies a method for determining the resistance to peeling of joints between two adjacent sheets of the same plastic or rubber sheets for waterproofing. This test method will be used mainly for testing the joints in mechanically fastened plastic or rubber sheets for waterproofing. The peel strength characterises the optimum joint strength which can be reached for a membrane and a joint technique under laboratory conditions. On roofs the joint strength could be clearly reduced due to the non-optimal conditions (e. g. pressure, temperature, humidity, pollution, workmanship). The requirement for the joint technique at the site is to ensure a permanently tight joint.
EN 12316-2:2013 Referenced Document
EN 13416:2001 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling
EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
EN 12316-2:2013 history
2013EN 12316-2:2013 Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
2000EN 12316-2:2000 Flexible Sheets for Waterproofing - Determination of Peel Resistance of Joints - Part 2: Plastic and Rubber Sheets for Roof Waterproofing