General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB 31144-2014
Scope
This standard specifies the requirements and/or measures for removing hazards and limiting risks on manual radial arm saws (hereinafter referred to as machine tools). This standard applies to machine tools for sawing solid wood, particleboard, fiberboard, plywood, and plastic-faced or welted materials. This standard does not apply to the following machine tools: a) desktop machine tools that can be moved by one person, work at a fixed work point, and are installed on a workbench or similar device; b) machine tools that are equipped with hydraulic power operating parts (such as hydraulic clamping devices); c) machine tools equipped with dynamic positioning devices; d) machine tools equipped with accessories for longitudinal sectioning, milling (including parting and grooving), sanding or drilling, etc.; e) machine tools with multiple saw axes.
GB 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
GB 14048.5-2008 Low-voltage switchgear and controlgear.Part5-1: Control circuit devives and switching element.Electromechanical control circuit devices
GB 4208-2008 Degrees of protection provided by enclosure(IP code)
GB 5226.1-2008 Electrical safety of machinery - Electrical equipment for machinery - Part 1: General specifications
GB 7247.1-2012 Safety of laser products.Part 1:Equipment classification and requirements
GB/T 1.1 Directives for standardization—Part 1: Rules for the structure and drafting of standardizing documents*, 2020-03-31 Update
GB/T 1.2 Directives for standardization—Part 2:Drafting rules of standardizing documents based on ISO/IEC standardizing documents*, 2020-11-19 Update
GB/T 1.22 Directives for work of standardization Unit2:Methodology for the development of standards Part22:Rule of "reference to standards"
GB/T 1.4 Standardization Work Guidelines Chemical Analysis Method Standard Compilation Provisions
GB/T 1.6 Regulations on Compilation of Terminology Standards in Standardization Work Guidelines
GB/T 14574-2000 Acoustics-Declaration and verification of noise emission values of machinery and equipment
GB/T 15706-2012 Safety of machinery.General principles for design.Risk assessment and risk reduction
GB/T 3767-1996 Acoustics--Determination of sound power levels of noise sources using sound pressure--Engineering method in an essentially free field over a reflecting plane
GB/T 3768-1996 Acoustics--Determination of sound power levels of noise sources using sound pressure--Survey method using an enveloping measurement surface over a reflecting plane
GB/T 5013.1-2008 Rubber insulated cables of rated voltages up to and including 450/750 V.Part 1:General requirements
GB/T 5023.1-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V.Part 1:General requirements
GB/T 6881.2-2002 Acoustics--Determination of sound power levels of noise soures--Engineering methods for small,movable sources in reverberant field--Part 1: Comparsion method for hard-walled test rooms
GB/T 6881.3-2002 Acoustics--Determination of sound power levels of noise sources-using sound pressure--Engineering metheds for small,movable sources in reverberant fields--Part 2: Methods for special reverberation test rooms
GB/T 6882-2008 Acoustics.Determination of sound power levels of noise sources using pressure.Precision methods for anechoic and hemi-anechoic rooms
GB/T 8196-2003 Safety of machinery--Guards--General requirements for the design and construction of fixed and movable guards
GB 31144-2014 history
2014GB 31144-2014 Safety of woodworking machines.Manual radial arm saws