General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB 12668.501-2013
Scope
This part of GB 12668 specifies the electrical, thermal and energy safety requirements for variable speed electric drive systems or their components. Except for the interface requirements, this section does not cover the driven equipment. This section applies to variable speed electrical drive systems including power conversion equipment, drive control equipment and electric motors. But excluding traction drives and electric vehicle drives, this part applies to DC drive systems connected to AC power supply voltages up to and including 1 kV, 50 Hz or 60 Hz, and converters with input or output voltages below 35 kV, 50 Hz or 60 Hz AC drive system. Other parts of "Adjustable Speed Electric Power Transmission System" involve the regulation of rated value, electromagnetic compatibility (EMC) and functional safety. If the equipment used as an integral part of the electrical drive system (PDS) complies with the safety requirements of the relevant product standards in the corresponding environment, the scope of this section does not include these equipment. For example, the motor used in the PDS should meet the requirements of the relevant parts of IEC 60034. Unless otherwise specified, the requirements of this section apply to all parts of the PDS, including CDM/BDM (see Figure 1).
GB 12668.501-2013 Referenced Document
GB 16895.3-2004 Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment-Earthing arrangements,protective conductors and protective bonding conductors
GB/T 12113-2003 Methods of measurement of touch current and protective conductor current
GB/T 16935.3-2005 Insulation coordination for equipment within low-voltage systems Part 3:Use of coating,potting or moulding for protection against pollution
GB/T 17948-2003 Functional Evaluation of Insulation systems for rotating electrical machines-General guidelines
GB/T 17948.1-2000 Rotating electrical machines-Functional evaluation of insulation systems Test procedures for wire-wound windings-Thermal evaluation and classification
GB/T 20114-2006 Specific test methods for d.c.machines on coventional and rectifier-fed supplies
GB/T 20161-2008 Cage induction motors when fed from converters.Application guide
GB/T 21205-2007 Specification for the refurbishing of rotating electrical machines
GB/T 21209-2007 Guide for the design and performance of cage induction motors specifically designed for converter supply
GB/T 21210-2007 Starting performance of single-speed three-phase cage induction motors
GB/T 22713-2008 Effects of unbalanced voltages on the performance of three-phase cage induction motor
GB/T 22715-2008 AC motor stator forming coil shock resistance voltage level
GB/T 22720.1-2008 Rotating eletrical machines.Qualification and type tests for type Ⅰ electrical insulation systems used in rotating eletrical machines fed from voltage converters
GB/T 23640-2009 AC generators for reciprocating internal combustion(RIC) engine driven generating sets
IEC 60034 Rotating electrical machines - ALL PARTS*, 2018-01-08 Update
GB 12668.501-2013 history
2013GB 12668.501-2013 Adjustable speed electrical power drive systems.Part 5-1:Safety requirements.Electrical, thermal and energy