NB/T 31042-2012
Converter of offshore permanent magnet wind turbine generator (English Version)

Standard No.

NB/T 31042-2012

Language

Chinese, Available in English version

Release Date

2012

Published By

Professional Standard - Energy

Status

Be replaced 2019-10

Replace By

NB/T 31042-2019

Latest

NB/T 31042-2019

Scope

This standard specifies the terms and definitions, technical requirements, test methods, inspection rules and product-related information of offshore permanent magnet wind turbine converters (hereinafter referred to as converters). This standard applies to voltage source converters installed in offshore wind farms connected to the stator windings of permanent magnet wind turbines.

NB/T 31042-2012 Referenced Document

• GB 3906-2006 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6kV and up to and including 40.5 kV
• GB 4208-2008 Degrees of protection provided by enclosure(IP code)
• GB/T 191-2008 Packaging.Pictorial marking for handling of goods
• GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.16-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test J and guidance:Mould growth
• GB/T 2423.18-2000 Environmental testing-Part 2: Tests-Test Kb:Salt mist,cyclic(sodium chloride solution)
• GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
• GB/T 2900.33-2004 Electrotechnical terminoligy-Power electronics
• GB/T 2900.53-2001 Electrotechnical terminology Wind turbine generator systems
• GB/T 3783-2008 General specification for low-voltage apparatus in ships
• GB/T 3797-2005 Electrical control assemblies
• GB/T 3859.1-1993 Semiconductor convertors.Specification of basic requirements
• GB/T 5169.1 Fire hazard testing for electric and eletronic products.Part 1:Terminology concerning fire tests*， 2015-10-09 Update
• GB/T 5169.10 Fire Hazard Tests for Electrical and Electronic Products - Part 10: Glow Wire/Hot Wire Basic Test Methods Glow Wire Apparatus and General Test Methods*， 2018-07-01 Update
• GB/T 5169.11 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products(GWEPT)*， 2017-12-29 Update
• GB/T 5169.11-2006 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products
• GB/T 5169.12 Fire hazard testing for electric and electronic products.Part 12: Glowing/hot-wire based test methods.Glow-wire flammability index (GWFI) test method for materials*， 2013-12-17 Update
• GB/T 5169.13 Fire hazard testing for electric and electronic product.Part 13:Glowing/hot-wire based test methods.Glow-wire ignition temperature (GWIT) test method for materials*， 2013-12-17 Update
• GB/T 5169.14 Fire hazard testing for electric and electronic products.Part 14:Test flames.1 kW nominal pre-mixed flame.Apparatus,confirmatory test arrangement and guidance*， 2017-12-29 Update
• GB/T 5169.15 Fire hazard testing for electric and eletronic products.Part 15: Test flames.500 W flames.Apparatus and confirmational test methods*， 2015-10-09 Update
• GB/T 5169.16 Fire hazard testing for electric and electronic products.Part 16:Test flames.50 W horizontal and vertical flame test methods*， 2017-12-29 Update
• GB/T 5169.17 Fire hazard testing for electric and electronic products.Part 17:Test flames.500 W flame test method*， 2017-12-29 Update
• GB/T 5169.18 Fire hazard testing for electric and electronic products.Part 18:Toxicity of fire effluent.General guidance*， 2013-12-31 Update
• GB/T 5169.19 Fire hazard testing for electric and electronic products—Part 19: Abnormal heat—Mould stress relief distortion test*， 2022-10-14 Update
• GB/T 5169.2 Fire hazard testing for electric and electronic products—Part 2: Guidance for assessing the fire hazard—General guidelines*， 2021-10-11 Update
• GB/T 5169.20 Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods*， 2021-10-11 Update
• GB/T 5169.21 Fire hazard testing for electric and electronic products.Part 21:Abnormal heat.Ball pressure test method*， 2017-12-29 Update
• GB/T 5169.22 Fire Hazard Tests for Electrical and Electronic Products - Part 22: Test Flame 50W Flame Apparatus and Confirmation Test Methods*， 2016-05-01 Update
• GB/T 5169.23 Fire hazard testing for electric and electronic products.Part 23:Test flames.500 W vertical flame test method for tubular polymeric materials
• GB/T 5169.24 Fire hazard testing for electric and electronic products—Part 24: Guidance for assessing the fire hazard—Insulating liquids*， 2018-09-17 Update
• GB/T 5169.25 Fire hazard testing for electric and electronic products—Part 25: Smoke obscuration—General guidance*， 2018-09-17 Update
• GB/T 5169.26 Fire hazard testing for electric and electronic products—Part 26: Smoke obscuration—Summary and relevance of test methods*， 2018-09-17 Update
• GB/T 5169.27 Fire hazard testing for eletric and electronic products.Part 27:Smoke obscuration.Small-scale static test.Description of the apparatus
• GB/T 5169.28 Fire hazard testing for electric and electronic products.Part 28:Smoke obscuration.Small-scale static test.Materials
• GB/T 5169.29 Fire hazard testing for electric and electronic products—Part 29: Heat release—General guidance*， 2020-11-19 Update
• GB/T 5169.3 Fire hazard testing for electric and electronic products-Part 3:Guidance for the preparation of requirements and test specifications for assessing fire hazard of electronic components
• GB/T 5169.30 Fire hazard testing for electric and electronic products—Part 30: Heat release—Summary and relevance of test methods*， 2020-11-19 Update
• GB/T 5169.31 Fire hazard testing for electric and electronic　products—Part 31: Surface spread of flame—General guidance*， 2022-10-14 Update
• GB/T 5169.35 Fire hazard testing for electric and electronic products.Part 35: Corrosion damage effects of fire effluent.General guidance*， 2015-10-09 Update
• GB/T 5169.36 Fire hazard testing for electric and electronic products.Part 36:Corrosion damage effects of fire effluent.Summary and relevance of test methods*， 2015-10-09 Update
• GB/T 5169.38 Fire hazard testing for electric and electronic products.Part 38:Toxicity of fire effluent.Summary and relevance of test methods*， 2014-09-03 Update
• GB/T 5169.39 Fire hazard testing for electric and electronic products.Part 39:Toxicity of fire effluent.Use and interpretation of test results*， 2015-10-09 Update
• GB/T 5169.40 Fire hazard testing for electric and electronic products.Part 40:Toxicity of fire effluent.Estimation of toxic potency.Apparatus and test method*， 2015-10-09 Update
• GB/T 5169.41 Fire hazard testing for electric and eletronic products—Part 41: Toxicity of fire effluent—Estimation of toxic potency—Calculation and interpretation of test results*， 2015-10-09 Update
• GB/T 5169.44 Fire hazard testing for electric and electronic products—Part 44: Guidance for assessing the fire hazard—Fire hazard assessment*， 2022-10-14 Update
• GB/T 5169.45 Fire hazard testing for electric and electronic products—Part 45: Guidance for assessing the fire hazard－Fire safety engineering*， 2019-06-04 Update
• GB/T 5169.46 Fire hazard testing for electric and electronic products—Part 46: Test flames—Determination of the characteristic heat flux for ignition from a non-contacting flame source*， 2020-11-19 Update
• GB/T 5169.47 Fire hazard testing for electric and electronic products—Part 47: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical p*， 2022-10-14 Update
• GB/T 5169.5 Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance*， 2020-11-19 Update
• GB/T 5169.5-2008 Fire hazard testing for electric and electronic products.Part 5:Test flames.Needle test method.Apparatus,confirmatory arrangement and guidance
• GB/T 5169.6 Fire hazard testing for electric and electronic products--Test method of bad connection with heater
• GB/T 5169.7 Fire hazard testing for electric and electronic products Test methods Diffusion type and premixed type flame test methods
• GB/T 5169.8 Fire hazard testing for electric and electronic products--Examples of fire hazard assessment procedures and interpretation of results--Combustion characteristics and survey of test methods for their determination
• GB/T 5169.9 Fire hazard testing for electric and electronic products—Part 9: Guidance for assessing the fire hazard—Preselection testing procedures—General guidelines*， 2021-10-11 Update

NB/T 31042-2012 history

• 2019 NB/T 31042-2019 Technical Specifications for Offshore Permanent Magnet Wind Turbine Converters
• 2012 NB/T 31042-2012 Converter of offshore permanent magnet wind turbine generator