GB/T 5169.5-2020
Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance (English Version)

Standard No.
GB/T 5169.5-2020
Language
Chinese, Available in English version
Release Date
2020
Published By
国家市场监督管理总局、中国国家标准化管理委员会
Latest
GB/T 5169.5-2020
Replace
GB/T 5169.5-2008
Scope
The needle flame test specified in this part of GB/T 5169 is used to simulate the effect of small flames caused by fault conditions, and to evaluate the fire hazard by using simulation techniques. When considering all factors related to the assessment of the fire hazard for a specific end use, the test results can be used as elements of the fire hazard assessment. This section applies to electrical and electronic equipment, equipment components and components, and also applies to solid insulating materials or other combustible materials. This section is intended to be used by product committees when writing standards according to the principles specified in IECGu i de104 and ISO/IECGu i de51. One of the tasks of product committees is to use this series of standards wherever applicable when writing their own standards. Unless the relevant standards specifically mention or list not applicable, the requirements, test methods or test conditions of this section apply.

GB/T 5169.5-2020 Referenced Document

  • ASTM B187 Standard Specification for Copper Bar, Bus Bar, Rod, and Shapes*， 2024-04-21 Update
  • GB/T 5169.1-2015 Fire hazard testing for electric and eletronic products.Part 1:Terminology concerning fire tests
  • ISO 13943:2008 Fire safety - Vocabulary
  • ISO 4046-4:2016 Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products
  • ISO/IEC GUIDE 51 Safety aspects - Guidelines for their inclusion in standards

GB/T 5169.5-2020 history

  • 2020 GB/T 5169.5-2020 Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance
  • 2008 GB/T 5169.5-2008 Fire hazard testing for electric and electronic products.Part 5:Test flames.Needle test method.Apparatus,confirmatory arrangement and guidance
  • 1997 GB/T 5169.5-1997 Fire hazard testing for electric and electronic products. Part 2: Test methods. Section 2: Needle-flame test
Fire hazard testing for electric and electronic products—Part 5: Test flames—Needle-flame test method—Apparatus, confirmatory test arrangement and guidance

GB/T 5169.5-2020 -All Parts

GB/T 5169.1-2015 Fire hazard testing for electric and eletronic products.Part 1:Terminology concerning fire tests GB/T 5169.10-2017 Fire Hazard Tests for Electrical and Electronic Products - Part 10: Glow Wire/Hot Wire Basic Test Methods Glow Wire Apparatus and General Test Methods GB/T 5169.11-2017 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products(GWEPT) GB/T 5169.12-2013 Fire hazard testing for electric and electronic products.Part 12: Glowing/hot-wire based test methods.Glow-wire flammability index (GWFI) test method for materials GB/T 5169.13-2013 Fire hazard testing for electric and electronic product.Part 13:Glowing/hot-wire based test methods.Glow-wire ignition temperature (GWIT) test method for materials GB/T 5169.14-2017 Fire hazard testing for electric and electronic products.Part 14:Test flames.1 kW nominal pre-mixed flame.Apparatus,confirmatory test arrangement and guidance GB/T 5169.15-2015 Fire hazard testing for electric and eletronic products.Part 15: Test flames.500 W flames.Apparatus and confirmational test methods GB/T 5169.16-2017 Fire hazard testing for electric and electronic products.Part 16:Test flames.50 W horizontal and vertical flame test methods GB/T 5169.17-2017 Fire hazard testing for electric and electronic products.Part 17:Test flames.500 W flame test method GB/T 5169.18-2013 Fire hazard testing for electric and electronic products.Part 18:Toxicity of fire effluent.General guidance GB/T 5169.19-2022 Fire hazard testing for electric and electronic products—Part 19: Abnormal heat—Mould stress relief distortion test GB/T 5169.2-2021 Fire hazard testing for electric and electronic products—Part 2: Guidance for assessing the fire hazard—General guidelines GB/T 5169.20-2021 Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods GB/T 5169.21-2017 Fire hazard testing for electric and electronic products.Part 21:Abnormal heat.Ball pressure test method GB/T 5169.22-2015 Fire Hazard Tests for Electrical and Electronic Products - Part 22: Test Flame 50W Flame Apparatus and Confirmation Test Methods GB/T 5169.23-2008 Fire hazard testing for electric and electronic products.Part 23:Test flames.500 W vertical flame test method for tubular polymeric materials GB/T 5169.24-2018 Fire hazard testing for electric and electronic products—Part 24: Guidance for assessing the fire hazard—Insulating liquids GB/T 5169.25-2018 Fire hazard testing for electric and electronic products—Part 25: Smoke obscuration—General guidance GB/T 5169.26-2018 Fire hazard testing for electric and electronic products—Part 26: Smoke obscuration—Summary and relevance of test methods GB/T 5169.27-2008 Fire hazard testing for eletric and electronic products.Part 27:Smoke obscuration.Small-scale static test.Description of the apparatus GB/T 5169.28-2008 Fire hazard testing for electric and electronic products.Part 28:Smoke obscuration.Small-scale static test.Materials GB/T 5169.29-2020 Fire hazard testing for electric and electronic products—Part 29: Heat release—General guidance


Copyright ©2024 All Rights Reserved