This European Standard is applicable to fastening systems, in categories A-E as specified in EN 13481-1:2012, 3.1, for use on concrete sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1. The requirements apply to: fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; fastening systems for the rail sections in EN 13674-1 (excluding 49 E4) and EN 13674-4. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints. This standard is for type approval of a complete fastening assembly only.
EN 13481-2:2012 Referenced Document
EN 13616 Overfill prevention devices for static tanks for liquid petroleum fuels (Incorporating Corrigendum January 2006)
EN ISO 1133 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)*, 2019-04-03 Update
EN ISO 1183-2 Plastics - Methods for determining the density of noncellular plastics - Part 2: Density gradient column method*, 2019-04-01 Update
EN ISO 179-1 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023)*, 2023-06-14 Update
EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 23667:2007 Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN ISO 4892-1 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance*, 2016-05-01 Update
EN ISO 4892-2 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO 4892-2:2013/Amd 1:2021)*, 2021-07-31 Update
EN ISO 527-2:1996 Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics ISO 527-2 : 1993 Including Corr 1 : 1994
EN 13481-2:2012 history
1970EN 13481-2:2022 Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
2017EN 13481-2:2012+A1:2017 Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
2016EN 13481-2:2012/FPRA1:2016 Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
2014EN 13481-2:2012/AC:2014 Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
2012EN 13481-2:2012 Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
2002EN 13481-2:2002 Railway Applications - Track - Performance Requirements for Fastening Systems - Part 2: Fastening Systems for Concrete Sleepers Includes amendment A1: 08/2006