GB/T 8753.1-2005
Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 1:Phosphoric acid/chromic acid test without nitric acid predip (English Version)

Standard No.

GB/T 8753.1-2005

Language

Chinese, Available in English version

Release Date

2005

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2017-12

Replace By

GB/T 8753.1-2017

Latest

GB/T 8753.1-2017

Replace

GB/T 14952.1-1994

Scope

This part specifies the method for evaluating the sealing quality of aluminum and aluminum alloy anodized films after being etched in a phosphorous-chromic acid solution without nitric acid pre-soaking, according to the mass loss. This section applies to anodic oxide films exposed to the atmosphere for decorative and protective purposes, with anti-pollution capabilities, and resistant to environmental corrosion. This section applies to both heat-sealed anodized films and cold-sealed anodized films. This standard does not apply to anodized coatings treated by the following processes: a) hard anodized coatings that are not usually sealed; b) anodized coatings that have been sealed in a dichromate solution; Anodized film formed in chromic acid solution; d) Hydrophobic treated anodized film. This method is a destructive test.

GB/T 8753.1-2005 history

• 2017 GB/T 8753.1-2017 Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1：Measurement of the loss of mass after immersion in acid solution(s)
• 2005 GB/T 8753.1-2005 Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 1:Phosphoric acid/chromic acid test without nitric acid predip
• 1994 GB/T 14952.1-1994 Anodizing of aluminium and its alloys.Assessment of quality of sealed anodic oxide coatings

GB/T 8753.1-2005 Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 1:Phosphoric acid/chromic acid test without nitric acid predip has been changed from GB/T 14952.1-1994 Anodizing of aluminium and its alloys.Assessment of quality of sealed anodic oxide coatings.

GB/T 8753.1-2005 -All Parts