JB/T 11202.1-2011
Specification of high-voltage increased-safety three-phase asynchronous motor.Part 1:YAKS & YAKS-W series high-voltage increased-safety three-phase asynchronous motor (frame size 355 to 630) (English Version)
- Standard No.
- JB/T 11202.1-2011
- Language
- Chinese, Available in English version
- Release Date
- 2011
- Published By
- Professional Standard - Machinery
- Latest
- JB/T 11202.1-2011
- Scope
- This part of JB/T 11202 specifies the type, basic parameters and dimensions, technical requirements, test methods and inspection rules, as well as marking and packaging requirements of YAKS and YAKS-W series high-voltage increased safety three-phase asynchronous motors. This part applies to YAKS and YAKS-W series high-voltage increased safety three-phase asynchronous motors (frame numbers 355 to 630) (hereinafter referred to as motors). All series of motors derived from this series of motors can also be implemented with reference.
JB/T 11202.1-2011 Referenced Document
- GB 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher.Measurement,evaluation and limits of vibration severity
- GB 1971-2006 Rotating electrical machines. Terminal markings and direction of rotation
- GB 3836.1-2010 Explosive atmospheres.Part 1:Equipment.General requirements
- GB 3836.3-2010 Explosive atmospheres.Part 3:Equipment protection by increased safety "e"
- GB 4208-2008 Degrees of protection provided by enclosure(IP code)
- GB 755-2008 Rotating electrical machines.Rating and performance
- GB/T 10069.1-2006 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
- GB/T 1032-2005 Test procedures for three-phase induction motors
- GB/T 191-2008 Packaging.Pictorial marking for handling of goods
- GB/T 1993-1993 Cooling methods for rotating electrical machines
- GB/T 22715-2008 AC motor stator forming coil shock resistance voltage level
- GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
- GB/T 4772.2-1999 Dimensions and output series for rotating electrical machines. Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
- GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined (IP code) - Classification
- GB/T 997-2008 Rotating electrical machines.Classification of types of construction,mounting arrangements and terminal box position for(IM Code)
- JB/T 4375-1999 Environmental conditions required by electric products used in outdoor and indoor corrosive locations
JB/T 11202.1-2011 history
- 2011 JB/T 11202.1-2011 Specification of high-voltage increased-safety three-phase asynchronous motor.Part 1:YAKS & YAKS-W series high-voltage increased-safety three-phase asynchronous motor (frame size 355 to 630)
