JIS B 8367-2:2009
Hydraulic fluid power -- Mounting dimensions for cylinders -- Part 2: Single rod, 16 MPa series -- Square cover and tie rod tightend type (Bores from 25 mm to 200 mm)

Standard No.

JIS B 8367-2:2009

Release Date

2009

Published By

Japanese Industrial Standards Committee (JISC)

Status

Withdraw

Latest

JIS B 8367-2:2009

Replace By

FZ/T 01085-2018

Replace

JIS B 8367-2:2002 JIS B 8366-7:2001

JIS B 8367-2:2009 Referenced Document

• ISO 1179-1 Connections for general use and fluid power.Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing.Part 1: Threaded ports*， 2013-11-01 Update
• ISO 6162-1 Hydraulic fluid power.Flange connections with split or one-piece flange clamps and metric or inch screws.Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127*， 2012-12-15 Update
• ISO 6162-2 Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76*， 2018-03-01 Update
• JIS B 0142:1994 Glossary of terms for oil hydraulics and pneumatics
• JIS B 0203 Taper pipe threads
• JIS B 0209-3 ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads
• JIS B 2351-1 Metallic tube connections for fluid power and general use -- Part 1: 24 degree SIGN compression fittings
• JIS B 2355-1 Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing
• JIS B 8366-1 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters and area ratios*， 2018-03-20 Update
• JIS B 8366-3 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 3: Basic series of piston strokes
• JIS B 8366-4 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 4: Piston rod end types and dimensions*， 2019-06-20 Update
• JIS B 8366-5 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 5: Identification code for mounting dimensions and mounting types*， 2015-12-21 Update
• JIS B 8367-1 Hydraulic fluid power -- Mounting dimensions for cylinders -- Part 1: Single rod, 16 MPa series -- Round cover types with welded or threaded flange (Bores from 25 mm to 500 mm)
• JIS B 8404-4 Hydraulic fluid power -- Mounting dimensions for accessories -- Part 4: Square cover type cylinders (Bores from 25 mm to 200 mm), 16 MPa series*， 2010-05-20 Update

JIS B 8367-2:2009 history

• 2009 JIS B 8367-2:2009 Hydraulic fluid power -- Mounting dimensions for cylinders -- Part 2: Single rod, 16 MPa series -- Square cover and tie rod tightend type (Bores from 25 mm to 200 mm)
• 2002 JIS B 8367-2:2002 Mounting dimensions for hydraulic cylinders -- Part 2: Single rod -- 16 MPa series, square cover and tie rod tightend type (Bores from 25 mm to 200 mm)
• 2001 JIS B 8366-7:2001 Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 7: Hydraulic fluid power -- Single rod cylinders, 16 MPa square cover, tie rod tightened type mounting dimensions -- Port dimensions

JIS B 8367-2:2009 Hydraulic fluid power -- Mounting dimensions for cylinders -- Part 2: Single rod, 16 MPa series -- Square cover and tie rod tightend type (Bores from 25 mm to 200 mm) was changed to FZ/T 01085-2018 Adhesive interlining peel strength test method.