This standard specifies the scope of components, inspection and supervision items, content and corresponding criteria for metal supervision in thermal power plants. This standard applies to the supervision of the following metal components: a) High-temperature pressure-bearing components with operating temperatures greater than or equal to 400°C (including main steam pipelines, high-temperature reheat steam pipelines, superheater tubes, reheater tubes, headers, valve housings and Tee), and small pipes connected to pipes and headers. b) Steam guide pipes and contact pipes with operating temperatures greater than or equal to 400°C. c) Steam drums and once-through boilers with working pressures greater than or equal to 3.82MPa are used for steam-water separators and water storage tanks. d) Pressurized steam and water pipes and components (including water wall pipes, evaporation sections, economizer pipes, headers and main water supply pipes) with a working pressure greater than or equal to 5.88MPa. e) Steam turbine shaft, impeller, blades, rags, bearings and generator shaft, retaining ring, fan blades. f) Bolts with operating temperature greater than or equal to 400°C. g) Cylinders, steam chambers, main steam valves, speed regulating valves, nozzles, partitions and partition sleeves with operating temperatures greater than or equal to 400°C. h) Low-temperature reheat steam pipelines with longitudinal welds for units of 300MW and above.
DL/T 438-2009 Referenced Document
DL 473-1992 Technical conditions for forged tee joints with high diameters
DL 612-1996 Supervision code for boiler and pressure vessel of the power industry
DL 647-2004 Inspection code for boiler and pressure vessel in thermal power plant
DL/T 439-2006 The technical guide for high-temperature bolt of fossil-fired power plant
DL/T 440-2004 The code of inspection and evaluation for existing boiler drum in fossil-fuel power plants
DL/T 441-2004 Supervision code for creep strain of steam pipe in high temperature and high pressure in fossil fuel power plant
DL/T 505 Ultrasonic testing rules for steam turbine main shaft weld seam*, 2016-08-16 Update
DL/T 531-1994 Technical Specification of Hihg Temperature High Pressure Globe Stop Valves and Gate Valves for Power Station
DL/T 616-2006 Maintenance & adjusting guide for thermal power plant Steam-water piping and support-hangers
DL/T 674-1999 The gradational standard of spherular pearlite for carbon steel No.20 used in fossil power plant
DL/T 695-1999 Steel pipe butt welding fittings for power plant
DL/T 714 Technical Guidelines for Ultrasonic Inspection of Steam Turbine Blades
DL/T 715 Selection guide for the metallic material of fossil power plants*, 2015-04-02 Update
DL/T 717 Technical Guidelines for Inspection of Turbine Generator Rotor Center Hole*, 2013-03-07 Update
GB 5310-2008 Seamless steel tubes and pipes for high pressure boiler
GB 713-2008 Steel plates for boilers and pressure vessels
GB/T 19624-2004 Safety assessment for in-service pressure vessels containing defects
GB/T 20410-2006 Steels for turbine bolts at high temperature
GB/T 9222-2008 Strength calculation of pressure parts for watertube boilers
DL/T 438-2009 history
2023DL/T 438-2023 Technical Supervision Regulations for Metals in Thermal Power Plants
2016DL/T 438-2016 The technical supervision codes for metal in fossil-fuel power plant
2009DL/T 438-2009 The technical supervision codes for metal in fossil-fuel power plant
2000DL 438-2000 Technical supervision codes for metal in thermal power plants
DL/T 438-2009 The technical supervision codes for metal in fossil-fuel power plant has been changed from DL 438-2000 Technical supervision codes for metal in thermal power plants.