ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices - Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
This Technical Report provides guidance on estimating the flowrate when using pressure differential devices constructed or operated outside the scope of ISO 5167.
Additional tolerances or corrections cannot necessarily compensate for the effects of deviating from ISO 5167(all parts).The information is given,in the first place,to indicate the degree of care necessary in the manufacture,installation and maintenance of pressure differential devices by describing some of the effects of non-conformity to the requirements;and in the second place,to permit those users who cannot comply fully with the requirements to assess,however roughly,the magnitude and direction of the resulting error in flowrate.
Each variation dealt with is treated as though it were the only one present.Where more than one is known to exist,there may be unpredictable interaction and care has to be taken when combining the assessment of these errors.If there is a significant number of errors,means of eliminating some of them have to be considered.The variations included in this Technical Report are by no means complete and relate largely to examples with orifice plates.An example with Venturi tubes has been placed at the end of its section.There are,no doubt,many similar examples of installations not conforming to ISO 5167(all parts)for which no comparable data have been published.Such additional information from users,manufacturers and any others may be taken into account in future revisions of this Technical Report.
ISO/TR 12767:2007 Referenced Document
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements
ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates
ISO 5167-3:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
ISO 5167-4:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes
ISO/TR 12767:2007 history
2023ISO/TR 12767:2023 Measurement of fluid flow by means of pressure differential devices — Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
2007ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices - Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
1998ISO/TR 12767:1998 Measurement of fluid flow by means of pressure-differential devices - Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1