These requirements cover cord-connected, relocatable power taps rated 250 V AC or less and 20 A AC or less. A relocatable power tap (RPT) is intended only for indoor use as a temporary extension of a grounding alternating-current branch circuit for general use. A cord-connected product with less than three receptacle outlets that employs an electromagnetic interference filter or a transient voltage surge suppressor is covered under the Standard for Electromagnetic Interference Filters, UL 1283, and the Standard for Surge Protective Devices, UL 1449, respectively. A cord-connected product with three or more receptacle outlets that employs an electromagnetic interference filter shall also comply with the Standard for Electromagnetic Interference Filters, UL 1283. A cord-connected product with three or more receptacle outlets that employs a transient voltage surge suppressor shall also comply with the Standard for Surge Protective Devices, UL 1449. Telephone equipment and communication circuit protectors included in a RPT shall comply with the requirements in the Standard for Telephone Equipment, UL 1459, and the requirements in the Standard for Secondary Protectors
UL 1363 BULLETINS-2004 history
2018UL 1363 BULLETIN-2018 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: May 21@ 2018)
2018UL 1363-2018 UL Standard for Safety Relocatable Power Taps (Fifth Edition)
2017UL 1363 CRD-2017 UL Standard for Safety Relocatable Power Taps - Section / Paragraph Reference: 13.8 and 48.24 Subject: RPT Employing Tamper Resistant Outlets (Edition 4: October 6@ 2014)
2017UL 1363 BULLETIN-2017 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: February 27@ 2017)
2016UL 1363 CRD-2016 UL Standard for Safety Relocatable Power Taps - Section / Paragraph Reference: Sections 1 (Scope); 3 (Glossary); Sections 11.1.7@ 12 (Construction) and 34 (Performance) Subject: Class 2 Lead (Edition 4: October 6@ 2014)
2015UL 1363 BULLETIN-2015 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: December 4@ 2015)
2014UL 1363 CRD-2014 UL Standard for Safety Relocatable Power Taps - Section/Paragraph Reference: 1.16@ 3.3 - 3.6@ 4.3 – 4.4@ 6.6 – 6.7@ Section 31.2@ Section 33A and Section 33B Subject: Pedestal Mounted Relocatable Power Taps (Edition 3: May 02@ 2007)
2014UL 1363 BULLETIN-2014 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: July 28@ 2014)
2014UL 1363-2014 UL Standard for Safety Relocatable Power Taps (Fourth Edition; Reprint with revisions through and including April 14@ 2017)
2013UL 1363 CRD-2013 UL Standard for Safety Relocatable Power Taps - Section / Paragraph Reference: New Paragraphs 17.12@ 21.1.11@ 21.2.9 and Section 36A Subject: Clarification of Requirements for RPTs with Moveable Parts Supersedes prior Certification Requirement Decision is
2013UL 1363 BULLETIN-2013 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: January 13@ 2014)
2012UL 1363 BULLETIN-2012 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: JUNE 20@ 2012)
2011UL 1363 BULLETIN-2011 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: April 11@ 2011)
2010UL 1363 BULLETIN-2010 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: October 04@ 2010)
2009UL 1363 BULLETIN-2009 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: October 26@ 2009)
2008UL 1363 CRD-2008 UL Standard for Safety Relocatable Power Taps - Section / Paragraph Reference: Paragraphs 13.2 and 14.8 Clarification of Paragraphs 13.2 and 14.8 (Edition 3: May 02@ 2007)
2008UL 1363 BULLETIN-2008 UL Standard for Safety Relocatable Power Taps (COMMENTS DUE: December 19@ 2008)
2007UL 1363 BULLETIN-2007 UL Standard for Safety Relocatable Power Taps COMMENTS DUE: January 21, 2008
2007UL 1363-2007 UL Standard for Safety Relocatable Power Taps Third Edition
2006UL 1363 BULLETINS-2006 UL Standard for Safety Relocatable Power Taps (10/27/2006 (4p); 06/30/2006 (8p))