GB/T 17213.11-2005
Industrial-process control valves.Part 3-2: Dimensions.Face to face dimensions for rotary control valves except butterfly valves (English Version)

Standard No.

GB/T 17213.11-2005

Language

Chinese, Available in English version

Release Date

2005

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 17213.11-2005

Scope

This part of GB/T 17213 is applicable to the following control valves: ——Type: partial spherical and eccentric rotary control valves with flange or without flange; ——Nominal diameter: DN20～DN400, including DN400; Suitable for raised face flanges. This section does not apply to welded and threaded control valves.

GB/T 17213.11-2005 Referenced Document

• EN 1092 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
• GB/T 17213.1 Industrial process control valves - Part 1: Terminology and general principles for control valves*， 2016-07-01 Update
• GB/T 17213.10 Industrial-process control valves.Part 2-4:Flow capacity.Inherent flow characteristics and rangeability*， 2015-12-10 Update
• GB/T 17213.12 Industrial-process control valves.Part 3-3: Dimensions.End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves
• GB/T 17213.13 Industrial-process control valves.Part 6-2: Mounting details for attachment of positioners to control valves.Positioner mounting on linear actuators
• GB/T 17213.14 Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves*， 2018-07-13 Update
• GB/T 17213.15 Industrial-process control valves—Part 8-3: Noise considerations—Control valve aerodynamic noise prediction method*， 2017-12-29 Update
• GB/T 17213.16 Industrial process control valves - Part 8-4: Noise considerations Noise prediction method for hydraulic flow through control valves*， 2016-07-01 Update
• GB/T 17213.17 Industrial-Process control valves.Part 2-5:Flow capacity.Sizing equations for fluid flow through multistage control valves with interstage recovery*， 2011-01-14 Update
• GB/T 17213.18 Industrial-process control valves.Part 9:Test procedure for response measurements from step inputs*， 2015-12-10 Update
• GB/T 17213.2 Industrial-process control valves—Part 2-1: Flow capacity—Sizing equations for fluid flow under installed conditions*， 2017-12-29 Update
• GB/T 17213.3 Industrial-process control valves.Part 3-1:Dimensions.Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves
• GB/T 17213.4 Industrial process control valves - Part 4: Inspection and routine tests*， 2016-07-01 Update
• GB/T 17213.5 Industrial-process control valves. Part 5:Marking*， 2008-06-30 Update
• GB/T 17213.6 Industrial-process control valves.Part 6-1: Mounting details for attachment of positioners to control valves.Positioner mounting on linear actuators
• GB/T 17213.7 Industrial-process control valves—Part 7: Control valve data sheet*， 2017-12-29 Update
• GB/T 17213.8 Industrial process control valves - Part 8-1: Noise considerations for laboratory measurements of noise generated by aerodynamic flow through control valves*， 2016-07-01 Update
• GB/T 17213.9 Industrial-process control valves.Part 2-3: Flow capacity.Test procedures
• ISO 6708 Pipework components - Definition and selection of DN (nominal size)
• ISO 7005 Metallic flanges; part 3: copper alloy and composite flanges
• ISO 7268 Pipe components — Definition of nominal pressure AMENDMENT 1

GB/T 17213.11-2005 history

• 2005 GB/T 17213.11-2005 Industrial-process control valves.Part 3-2: Dimensions.Face to face dimensions for rotary control valves except butterfly valves

GB/T 17213.11-2005 -All Parts