GB/T 21412.10-2019 Petroleum and natural gas industries—Design and operation of subsea production systems—Part 10: Specification for bonded flexible pipe (English Version)
This part of GB/T21412 refers to the technical requirements for the design and manufacturing of safety, scale and adhesive flexible pipes. For the minimum requirements for typical labeling and packaging, please refer to the specifications and standards in use. 1 - Outer wrap; 2 - Covering layer; 3 - Breaking layer; 4 - Buffer layer; This section applies to hard and acidic materials Media, including external and injection applications. EN quality includes oil, gas, water and chemical injection. This section applies to static and dynamic flexible pipes used through flowlines, risers, jumpers and offshore installation hoses. This section applies to flexible pipes with a design pressure greater than or equal to 1.5MPa (15bar), and also applies to flexible pipes with low design pressures, although the design requirements for these flexible pipes are not specified. These guidelines for flexible pipes may be implemented with reference to OCIMEF. This section applies to flexible pipes used in piling hammers, torch gas supplies, water supplies and radio jets, although these requirements cannot be addressed by special and unique technologies. This section does not apply to flexible pipes used in compression and choke pipes. The application of well killing and choke pipes can refer to the guidelines of APISpec16C. This section does not apply to non-adhesive flexible pipes. Non-adhesive flexible pipe standards can refer to ISO13628-2. This section does not apply to flexible pipe accessories. Accessory parts guidelines can be implemented with reference to APIRP17B.
GB/T 21412.10-2019 Referenced Document
ASTM A668 Standard Specification for Steel Forgings, Carbon And Alloy, For General Industrial Use
ASTM A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM D1418 Standard Practice for Rubber and Rubber Latices-Nomenclature
ASTM D2084 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D2563 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
ASTM D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D395 Standard Test Methods for Rubber Property-Compression Set
ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers8212;Tension
ASTM D413 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
ASTM D5028 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D570 Standard Test Method for Water Absorption of Plastics
ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D695 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
ASTM E165 Standard Test Method for Liquid Penetrant Examination
ASTM E428 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing*, 2024-04-22 Update
ASTM E92 Standard Test Method for Vickers Hardness of Metallic Materials
ASTM E94 Standard Guide for Radiographic Examination*, 2024-04-22 Update
EN 287 Qualification test of welders - Fusion welding - Part 6: Cast irons
EN 288-3 Specification and Approval of Welding Procedures for Metallic Materials - Part 3: Welding Procedure Tests for the Arc Welding of Steels Includes Amendment A1: 1997
GB/T 12829 Rubber, vulcanized or thermoplastic. Determination of tear strength of small test pieces (Delft test pieces)
GB/T 15256 Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness(multiple test piece method)
GB/T 1690 Rubber,vulcanized or thermoplastic.Determination of the effect of liquids
GB/T 18253 Steel and steel products—Types of inspection documents
GB/T 21412.10 Petroleum and natural gas industries—Design and operation of subsea production systems—Part 10: Specification for bonded flexible pipe
GB/T 21412.4 Petroleum and natural gas industries.Design and operation of subsea production systems.Part 4: Subsea wellhead and tree equipment
GB/T 22513 Wellhead devices and Christmas trees for oil and gas drilling and production equipment*, 2023-05-23 Update
GB/T 228.1 Metallic materials—Tensile testing—Part 1: Method of test at room temperature*, 2021-12-31 Update
GB/T 231.1 Metallic materials—Brinell hardness test—Part 1: Test method
GB/T 2411 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)
GB/T 24242.1 Non-alloy steel wire rod for conversion to wire—Part 1:General requirements*, 2020-09-29 Update
GB/T 2942 Rubber,vulcanized.Determination of static adhension to textile cord.H-pull test
GB/T 528 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties
GB/T 532 Rubber,vulcanized or thermoplastic.Determination of adhesion to textile fabric
GB/T 533 Rubber,vulcanized or thermoplastic.Determination of density
GB/T 7762 Rubber, vulcanized or thermoplastic.Resistance to ozone cracking.Static strain testing
GB/T 9867 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device
ISO 13665 Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
ISO 4647:1982 Rubber, vulcanized; Determination of static adhesion to textile cord; H-pull test
ISO 4649:2002 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 812:2011 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness
GB/T 21412.10-2019 history
2019GB/T 21412.10-2019 Petroleum and natural gas industries—Design and operation of subsea production systems—Part 10: Specification for bonded flexible pipe