This chapter of GB/T 14536.1-2022 is applicable except for the following contents. Replacement: This document applies to burner electric automatic control systems for automatic control of burners using oil, gas, coal or other fuels. The system is used in the following situations: ---Household and similar purposes; ---Shops, Offices, hospitals, farms, and commercial and industrial applications. This document is applicable to: --- a complete burner control system; --- a separate program control device; --- a separate electronic high-voltage ignition source; --- a separate flame detector; --- a separate High temperature operation (HTO) detector; --- Burner control system for heating equipment (furnace) equipped with electromechanical pressure difference controller to monitor combustion air pressure difference (2.GB/T14536.1- This chapter of 2022 applies except for the following: J.1.1.1.1 Addition: Note 101: Hot surface igniters are not regarded as thermistors. 38 GB/T14536.6—2022 Appendix AA (informative) related appliances Functional characteristics of the burner control system specified in the standard (when applicable) Table AA.1 gives the functional characteristics of the burner control system specified in the relevant appliance standard when applicable. Table AA.1 Burner control system specified in the relevant appliance standard Functional characteristics (where applicable) of project clauses Remarks Composite System 3.2.
GB/T 14536.6-2022 Referenced Document
GB/T 14536.1-2022 Automatic electrical controls—Part 1: General requirements
IEC 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
GB/T 14536.6-2022 history
2022GB/T 14536.6-2022 Automatic electrical controls—Part 6:Particular requirements for automatic electrical burner control systems
2008GB 14536.6-2008 Automatic electrical controls for household and similar use.Particular requirements for automatic electrical burner control systems
1996GB 14536.6-1996 Automatic electrical controls for household and similar use.Particular requirements for automatic electrical burner control systems