SAE AMS2515H-2018 PDF

Scope: Purpose This specification establishes the engineering requirements for producing thin coatings of polytetrafluoroethylene (PTFE) resin on parts and the properties of such coatings. Application Primarily to provide dry lubrication@ high heat stability@ and corrosion protection on parts which operate at not higher than 275 ??(527 ?? for limited periods or not higher than 245 ??(473 ?? for extended periods. This coating may also be used as a release film for molds. This coating should not be specified for use on parts made of@ or coated with@ metals@ such as cadmium@ lead@ tin@ and zinc@ having melting points below or only slightly above the fusing temperature of 3.4. Safety - Hazardous Materials While the materials@ methods@ applications@ and processes described or referenced in this specification may involve the use of hazardous materials@ this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.

SAE AMS2515H-2018 history

2018 SAE AMS2515H-2018 Polytetrafluoroethylene (PTFE) Resin Coating@ Low Build@ 370 to 400 °C (698 to 752 °F) Fusion
2013 SAE AMS2515G-2013 Polytetrafluoroethylene (PTFE) Resin Coating, Low Build, 370 to 400°C (698 to 752°F) Fusion
2011 SAE AMS2515F-2011 Polytetrafluoroethylene (PTFE) Resin Coating, Low Build, 370 to 400°C (698 to 752°F) Fusion
2003 SAE AMS2515E-2003 Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 to 400 °C (698 to 752 °F) Fusion
2003 SAE AMS2515D-2003 Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 to 400 °C (698 to 752 °F) Fusion
1990 SAE AMS2515E-1990 Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 - 400 Degrees C (698 - 752 Degrees F) Fusion
1983 SAE AMS2515D-1983 Polytetrafluoroethylene Resin Coating Low Build@ 370 Degrees - 400 Degrees C (700 Degrees - 750 Degrees F) Fusion
1974 SAE AMS2515C-1974 Polytetrafluoroethylene Resin Coating Low Build@ 700 Degrees - 750 Degrees F (371 Degrees - 399 Degrees C) Fusion
1965 SAE AMS2515B-1965 Polytetrafluoroethylene Resin Coating Low Build@ 700 - 750 F (371 - 399 C) Fusion
1963 SAE AMS2515A-1963 Polytetrafluoroethylene Resin Coating Low Build@ 700 - 750 F (370 - 400 C) Fusion
1961 SAE AMS2515-1961 Polytetrafluoroethylene Resin Coating 700 - 750 F Fusion