BS EN 12729:2023 Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A
This document specifies the field of application, the dimensional, the physico-chemical, the design, the hydraulic, the mechanical, and the acoustic characteristics of controllable backflow preventers with reduced pressure zone, Family B, Type A.
This document covers controllable backflow preventers of Family B, Type A, with reduced pressure zones, intended to prevent pollution of potable water by backflow, caused by backsiphonage or by backpressure.
It is applicable to controllable backflow preventers in denominations DN 6 up to DN 250.
It covers controllable backflow preventers of PN 10 that are capable of working without modification or adjustment:
— at any pressure, up to 1 MPa (10 bar);
— with any pressure variation, up to 1 MPa (10 bar);
— in permanent duty at a limited temperature of 65 °C and for maximum 1 h at 90 °C.
It specifies also the test methods and requirements for verifying their characteristics, the marking and the presentation at delivery.
BS EN 12729:2023 Referenced Document
EN 10310:2003 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings*, 2024-04-21 Update
EN 1267 Industrial valves - Test of flow resistance using water as test fluid*, 2012-01-01 Update
EN 1329-1 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system*, 2020-11-30 Update
EN 13828 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Test and requirements*, 2003-09-01 Update
EN 13959 Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D*, 2024-04-21 Update
EN 1453-1 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system*, 2017-01-01 Update
EN 14901-1 Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)*, 2019-11-13 Update
EN 1717 Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow*, 2024-04-21 Update
EN 806-1 Specifications for installations inside buildings conveying water for human consumption - Part 1: General*, 2000-09-01 Update
EN ISO 11357-1 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2023)*, 2023-03-08 Update
EN ISO 21920-2 Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)*, 2022-01-19 Update
EN ISO 2409 Paints and varnishes - Cross-cut test (ISO 2409:2020)*, 2020-09-23 Update
EN ISO 2808 Paints and varnishes - Determination of film thickness (ISO 2808:2019)*, 2019-09-18 Update
EN ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2018)*, 2018-12-12 Update
EN ISO 3822-1 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty (ISO 3822-1:1999/Amd 1:2008)*, 2008-12-15 Update
EN ISO 3822-3 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances*, 2018-02-01 Update
EN ISO 4624 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)*, 2023-06-21 Update
EN ISO 4628-2 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects@ and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering*, 2016-02-01 Update
EN ISO 4628-3 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects@ and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting*, 2016-02-01 Update
EN ISO 6272-1 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter*, 2011-08-01 Update
EN ISO 6509-1 Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method*, 2014-06-01 Update
EN ISO 8501-1 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel subtrates after overall removal of previous*, 2007-01-01 Update
EN ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)*, 2003-03-01 Update
EN ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:2022/DAM 1:2023)
ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation*, 2000-09-01 Update
BS EN 12729:2023 history
1970BS EN 12729:2023 Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A
0000 BS EN 12729:2002(2009)
2003BS EN 12729:2003 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B. Type A
2003BS EN 12729:2002 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B. Type A