This part of GB 15558 specifies the terms and definitions, materials, requirements and tests for buried polyethylene (PE) pipes for gas (hereinafter referred to as "pipes") extruded from polyethylene (PE) compounds as raw materials. Methods, inspection rules, marking and packaging, transportation, storage. The types of pipes specified in this part include: --Single-layer solid-wall pipes; --Pipes whose outer wall is covered with a peelable thermoplastic protective layer. This part is applicable to buried polyethylene (PE) pipes for gas with a nominal outer diameter of 16 mm to 630 mm manufactured by PE 80 and PE 100. The maximum operating pressure (MOP) of the pipe is determined based on the design stress, taking into account the Effect of Rapid Crack Propagation (RCP) Properties. When transporting artificial gas and liquefied petroleum gas, the adverse effects of other components in the gas (such as: aromatic hydrocarbons, condensate) on the performance of the pipe at a certain concentration should be considered.
GB/T 15558.1-2015 Referenced Document
GB/T 1033.1-2008 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
GB/T 1033.2-2010 Plastics.Methods for determining the density of non-cellular plastics.Part 2:Density gradient column method
GB/T 10798 Table of universal wall thickness of thermoplastics pipe
GB/T 13021 Calcination and pyrolysis methods for determination of carbon black content of polyolefin pipes and fittings*, 2023-08-06 Update
GB/T 18251 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds*, 2019-08-30 Update
GB/T 18252 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation*, 2020-11-19 Update
GB/T 18475 Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall Service(design) coefficient
GB/T 18476 Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test)*, 2019-08-30 Update
GB/T 19278-2003 General terms and their definitions of thermoplastic pipes,fittings and valves
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2918 Standard environment for conditioning and testing of plastic specimens*, 2019-11-01 Update
GB/T 321 Preferred numbers-Series of preferred numbers
GB/T 3681-2011 Plastics. Methods of exposure to direct weathering,to weathering using glass-filtered daylight,and to intensified weathering by daylight using Fresnel mirrors
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 4217 Thermoplastics pipes for the conveyance of fluids.Nominal outside diameters and nominal pressures
GB/T 6111 Thermoplastics piping systems for the conveyance of fluids.Determination of the resistance to internal pressure*, 2018-03-15 Update
GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion
GB/T 8804.1-2003 Thermoplastic pipes--Determination of tensile properties--Part 1: General test method
GB/T 8804.3-2003 Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes
GB/T 8806 Plastics piping systems.Plastics components.Determination of dimensions
GB/T 15558.1-2015 history
2023GB/T 15558.1-2023 Buried polyethylene (PE) piping systems for gas use Part 1: General principles
2017GB 15558.1-2015 Buried polyethylene (PE) piping systems for gas - Part 1: Pipes
2003GB 15558.1-2003 Buried Polyethylene (PE) piping systems for the supply of gaseous fuels-Part 1:Pipes
1995GB 15558.1-1995 Buried polyethylene (PE) pipes for the supply of gaseous fuels
GB/T 15558.1-2015 Buried polyethylene (PE) piping systems for the supply of gaseous fuels.Part 1:Pipes has been changed from GB 15558.1-2003 Buried Polyethylene (PE) piping systems for the supply of gaseous fuels-Part 1:Pipes.
GB/T 15558.1-2015 Buried polyethylene (PE) piping systems for the supply of gaseous fuels.Part 1:Pipes was changed to GB/T 15558.2-2023 Buried polyethylene (PE) piping systems for gas use Part 2: Pipes.