IEC 60317-33:2015
Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- Standard No.
- IEC 60317-33:2015
- Release Date
- 2015
- Published By
- International Electrotechnical Commission (IEC)
- Latest
- IEC 60317-33:2015
- Replace
- IEC 55/1493/CDV:2014 IEC 60317-33:1990 IEC 60317-33 AMD 1:1997 IEC 60317-33 AMD 2:2005 IEC 60317-33 Edition 1.1:1997
- Scope
- This part of IEC 60317 specifies the requirements of polyester glass fibre wound, impregnated, bare or enamelled rectangular copper winding wire, temperature index 200. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The range of nominal conductor dimensions covered by this standard is: width: min. 2,0 mm max. 16,0 mm; thickness: min. 0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-4.
IEC 60317-33:2015 Referenced Document
- IEC 60317-0-4:2015 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
IEC 60317-33:2015 history
- 2015 IEC 60317-33:2015 Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- 2005 IEC 60317-33:1990/AMD2:2005 Amendment 2 - Specifications for particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- 1997 IEC 60317-33:1990/AMD1:1997 Specifications for particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200; Amendment 1
- 1997 IEC 60317-33:1997 Specifications for particular types of winding wires - Part 33: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
- 1990 IEC 60317-33:1990 Specifications for particular types of winding wires; part 33: glass-fibre wound, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200
