DIN EN ISO 10855-1:2018
Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018); English version EN ISO 10855-1:2018

Standard No.

DIN EN ISO 10855-1:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 10855-1:2018-11

Latest

DIN EN ISO 10855-1:2024-03

Replace

DIN EN 12079-1:2006 DIN EN ISO 10855-1:2016

Scope

This International Standard specifies requirements for the design, manufacture and marking of offshore containers with maximum gross mass not exceeding 25000 kg, intended for repeated use to, from and between offshore installations and ships. This document specifies only transport related requirements.

DIN EN ISO 10855-1:2018 Referenced Document

• DIN EN ISO 10042:2006 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2005); English version of DIN EN ISO 10042:2006-02
• DIN EN ISO 10675-1:2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016); German version EN ISO 10675-1:2016
• DIN EN ISO 10675-2:2018 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017)
• DIN EN ISO 10855-2:2018 Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018); German version EN ISO 10855-2:2018
• DIN EN ISO 10855-3:2018 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018); German version EN ISO 10855-3:2018
• DIN EN ISO 10961:2012 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010); German version EN ISO 10961:2012
• DIN EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
• DIN EN ISO 148-1:2017 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016); German version EN ISO 148-1:2016
• DIN EN ISO 15607:2004 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003); German version EN ISO 15607:2003
• DIN EN ISO 15609-1:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004); German version EN ISO 15609-1:2004
• DIN EN ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
• DIN EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005
• DIN EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013); German version EN ISO 17636-1:2013
• DIN EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013); German version EN ISO 17636-2:2013
• DIN EN ISO 3452-1:2014 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01); German version EN ISO 3452-1:2013
• DIN EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014); German version EN ISO 5817:2014
• DIN EN ISO 6892-1:2017 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016); German version EN ISO 6892-1:2016
• DIN EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
• DIN EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015); German and English version EN ISO 9001:2015
• DIN EN ISO 9606-2:2005 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004); German version EN ISO 9606-2:2004
• DIN EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012); German version EN ISO 9712:2012

DIN EN ISO 10855-1:2018 history

• 2024 DIN EN ISO 10855-1:2024-03 Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO/DIS 10855-1:2024); English version prEN ISO 10855-1:2024 / Note: Date of issue 2024-02-09*Intended as replacement for DIN EN ISO 10855...
• 2018 DIN EN ISO 10855-1:2018-11 Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018); English version EN ISO 10855-1:2018
• 2018 DIN EN ISO 10855-1:2018 Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018); English version EN ISO 10855-1:2018
• 1970 DIN EN ISO 10855-1 E:2016-01 Offshore containers and associated lifting equipment Part 1: Design, manufacture and marking of offshore containers (draft)
• 2006 DIN EN 12079-1:2006 Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking; English version EN 12079-1:2006
• 0000 DIN EN 12079-1:2004
• 0000 DIN EN 12079:1999

DIN EN ISO 10855-1:2018 Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018); English version EN ISO 10855-1:2018 has been changed from DIN EN 12079-1:2006 Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking; English version EN 12079-1:2006.