DIN EN ISO 10855-3:2018
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018); German version EN ISO 10855-3:2018

Standard No.

DIN EN ISO 10855-3:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 10855-3:2018-11

Latest

DIN EN ISO 10855-3:2024-03

Replace

DIN EN 12079-3:2006 DIN EN ISO 10855-3:2016

Scope

This document specifies requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with ISO 10855 1, with maximum a gross mass not exceeding 25000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included. Recommended knowledge and experience of staff responsible for inspection of offshore containers is given in Annex B. Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers is given in Annex C.

DIN EN ISO 10855-3:2018 Referenced Document

• DIN EN ISO 10675-1:2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016); German version EN ISO 10675-1:2016
• DIN EN ISO 10675-2:2018 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017)
• DIN EN ISO 10855-1:2018 Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018); English version EN ISO 10855-1:2018
• DIN EN ISO 10855-2:2018 Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018); German version EN ISO 10855-2:2018
• DIN EN ISO 10961:2012 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010); German version EN ISO 10961:2012
• DIN EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
• DIN EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013); German version EN ISO 17636-1:2013
• DIN EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013); German version EN ISO 17636-2:2013
• DIN EN ISO 17637:2017-04 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016); German version EN ISO 17637:2016
• DIN EN ISO 17638:2017 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016); German version EN ISO 17638:2016
• DIN EN ISO 17640:2018 Non-destructive testing of welded joints – Ultrasonic testing – Techniques, test classes and evaluation (ISO 17640:2017); German version EN ISO 17640:2017
• DIN EN ISO 17643:2015 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015); German version EN ISO 17643:2015
• DIN EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015); German version EN ISO 23277:2015
• DIN EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015); German version EN ISO 23278:2015
• DIN EN ISO 3452-1:2014 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01); German version EN ISO 3452-1:2013
• DIN EN ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005); English version of DIN EN ISO 3834-2:2006-03
• DIN EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014); German version EN ISO 5817:2014
• DIN EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015); German and English version EN ISO 9001:2015
• DIN EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012); German version EN ISO 9712:2012
• DIN EN ISO/IEC 17020:2012 Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012); German and English version EN ISO/IEC 17020:2012
• EN 818-6 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

DIN EN ISO 10855-3:2018 history

• 2024 DIN EN ISO 10855-3:2024-03 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO/DIS 10855-3:2024); German and English version prEN ISO 10855-3:2024 / Note: Date of issue 2024-02-09*Intended as replacement for DIN EN ISO 1085...
• 2018 DIN EN ISO 10855-3:2018-11 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018); German version EN ISO 10855-3:2018
• 2018 DIN EN ISO 10855-3:2018 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018); German version EN ISO 10855-3:2018
• 1970 DIN EN ISO 10855-3 E:2016-01 Offshore containers and associated lifting equipment Part 3: Periodic inspections, inspections and testing (Draft)
• 2006 DIN EN 12079-3:2006 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing; English version EN 12079-3:2006
• 0000 DIN EN 12079-3:2004
• 0000 DIN EN 12079:1999

DIN EN ISO 10855-3:2018 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018); German version EN ISO 10855-3:2018 has been changed from DIN EN 12079-3:2006 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing; English version EN 12079-3:2006.