DIN VDE 0100-410:2018
Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock (IEC 60364-4-41:2005, modified + A1:2017, modified); German implementation of HD 60364-4-41:2017 + A11:2017

Standard No.

DIN VDE 0100-410:2018

Release Date

2018

Published By

German Institute for Standardization

Latest

DIN VDE 0100-410:2018

Replace

DIN VDE 0100-410:2007 DIN VDE 0100-410/A1:2016 DIN VDE 0100-739:1989

Scope

This document specifies essential requirements regarding protection against electric shock, including basic protection (protection against direct contact) and fault protection (protection against indirect contact) of persons and livestock. It deals also with the application and co-ordination of these requirements in relation to external influences.

DIN VDE 0100-410:2018 Referenced Document

• DIN 18014:2014 Foundation earth electrode - Planning, execution and documentation
• DIN 18015-1:2013 Electrical installations in residential buildings - Part 1: Planning principles
• DIN EN 60146-2:2001 Semiconductor convertors - Part 2: Self-commutated semiconductor convertors including direct d.c. convertors (IEC 60146-2:1999); German version EN 60146-2:2000
• DIN EN 60529:2014 Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989 + A1:1999 + A2:2013); German version EN 60529:1991 + A1:2000 + A2:2013
• DIN EN 60664-1:2008 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests (IEC 60664-1:2007); German version EN 60664-1:2007
• DIN EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2016); German version EN 60664-3:2017
• DIN EN 60664-4 Berichtigung 1:2007 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress (IEC 60664-4:2005); German version EN 60664-4:2006, Corrigenda to DIN EN 60664-4 (VDE 0110-4):2006-06; CENELEC-Corrigendum October 20
• DIN EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress (IEC 60664-4:2005); German version EN 60664-4:2006
• DIN EN 60947-2:2018 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 60947-2:2016 + COR1:2016); German version EN 60947-2:2017
• DIN EN 61008-1:2018 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:2010, modified + A1:2012, modified + A1:2012/COR1:2016 + A2:2013, modified + A2:2013/Cor.:2014);
• DIN EN 61009-1:2016 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules (IEC 61009-1:2010, modified + A1:2012, modified + A1:2012/Cor.:2012 + A2:2013, modified + A2:2013/Cor.:2014); Ge
• DIN EN 61009-2-1:1999 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage (IEC 61009-2-1:1991); German version E
• DIN EN 61140:2016 Protection against electric shock - Common aspects for installation and equipment (IEC 61140:2016); German version EN 61140:2016
• DIN EN 61386-1:2009 Conduit systems for cable management - Part 1: General requirements (IEC 61386-1:2008); German version EN 61386-1:2008
• DIN EN 61386-21:2011 Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems (IEC 61386-21:2002); German version EN 61386-21:2004 + A11:2010
• DIN EN 61386-22:2011 Conduit Systems for cable management - Part 22: Particular requirements - Pliable conduit systems (IEC 61386-22:2002); German version EN 61386-22:2004 + A11:2010
• DIN EN 61386-23:2011 Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems (IEC 61386-23:2002); German version EN 61386-23:2004 + A11:2010
• DIN EN 61386-24:2011 Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground (IEC 61386-24:2004); German version EN 61386-24:2010
• DIN EN 61386-25:2012 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices (IEC 61386-25:2011); German version EN 61386-25:201
• DIN EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2011); German version EN 61439-1:2011
• DIN EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems (IEC 61557-8:2014); German version EN

DIN VDE 0100-410:2018 history

• 2018 DIN VDE 0100-410:2018 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock (IEC 60364-4-41:2005, modified + A1:2017, modified); German implementation of HD 60364-4-41:2017 + A11:2017
• 2007 DIN VDE 0100-410:2007 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock (IEC 60364-4-41:2005, modified); German implementation HD 60364-4-41:2007
• 1997 DIN VDE 0100-410:1997 Erection of power installations with nominal voltages up to 1000 V - Part 4: Protection for safety; Chapter 41: Protection against electric shock (IEC 60364-4-41:1992, modified); German version HD 384.4.41 S2:1996
• 1996 DIN VDE 0100-470:1996 Erection of power installations with nominal voltages up to 1000 V - Part 4: Protection for safety; Chapter 47: Application of protective measures for safety (IEC 60364-4-47:1981 + A1:1993, modifiziert); German version HD 384.4.47 S2:1995
• 1989 DIN VDE 0100-739:1989 Erection of power installations with nominal voltages up to 1000 V; additional protection in the case of direct contact in dwellings be residual current devices with I<(Index)n> 30mA in TN systems and TT systems