DIN EN 60947-2:2018
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 60947-2:2016 + COR1:2016); German version EN 60947-2:2017

Standard No.

DIN EN 60947-2:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced 2020-11

Replace By

DIN EN 60947-2:2020

Latest

DIN EN 60947-2:2020

DIN EN 60947-2:2018

Replace

DIN EN 60947-2:2014 DIN EN 60947-2:2015

Scope

This standard applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1000 V a.c. or 15000 V d.c.; it also contains additional requirements for integrally fused circuit-breakers.

DIN EN 60947-2:2018 Referenced Document

• DIN EN 50557:2012 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses; German version EN 50557:2011
• DIN EN 55011:2017 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (CISPR 11:2015, modified); German version EN 55011:2016
• DIN EN 55022:2011 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 22:2008, modified); German version EN 55022:2010
• DIN EN 60051-1:2017 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts (IEC 60051-1:2016); German version EN 60051-1:2017
• DIN EN 60051-2:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 2: special requirements for ammeters and voltmeters (IEC 60051-2:1984, edition 4); german version EN 60051-2:1989
• DIN EN 60051-3/A1:1995 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters (IEC 60051-3:1984/A1:1994); German version EN 60051-3:1989/A1:1995
• DIN EN 60051-3:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 3: special requirements for wattmeters and varmeters (IEC 60051-3:1984, edition 4); german version EN 60051-3:1989
• DIN EN 60051-4:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 4: special requirements for frequency meters (IEC 60051-4:1984, edition 4); german version EN 60051-4:1989
• DIN EN 60051-5:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 5: special requirements for phase meters, power factor meters and synchroscopes (IEC 60051-5:1985, edition 4); german version EN 60051-5:1989
• DIN EN 60051-6:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 6: special requirements for ohmmeters (impedance meters) and conductance meters (IEC 60051-6:1984, edition 4); german version EN 60051-6:1989
• DIN EN 60051-7:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 7: special requirements for multi-function instruments (IEC 60051-7:1984, edition 4); german version EN 60051-7:1989
• DIN EN 60051-8:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 8: special requirements for accessories (IEC 60051-8:1984, edition 4); german version EN 60051-8:1989
• DIN EN 60051-9/A1:1996 Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods (IEC 60051-9:1988/A1:1994); German version EN 60051-9:1989/A1:1995
• DIN EN 60051-9/A2:1995 Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods (IEC 60051-9:1988/A2:1995); German version EN 60051-9:1989/A2:1995
• DIN EN 60051-9:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 9: recommended test methods (IEC 60051-9:1988, edition 4); german version EN 60051-9:1989
• DIN EN 60068-2-14:2010 Environmental testing - Part 2-14: Tests - Test N: Change of temperature (IEC 60068-2-14:2009); German version EN 60068-2-14:2009
• DIN EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005
• DIN EN 60112:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009); German version EN 60112:2003 + A1:2009
• DIN EN 60269-1:2015 Low-voltage fuses - Part 1: General requirements (IEC 60269-1:2006 + A1:2009 + A2:2014); German version EN 60269-1:2007 + A1:2009 + A2:2014
• DIN EN 60664-1:2008 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests (IEC 60664-1:2007); German version EN 60664-1:2007
• DIN EN 60898-1 Berichtigung 1:2009 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation (IEC 60898-1:2002, modified + A1:2002, modified); German version EN 60898-1:2003 + A1:2004 + Corrige
• DIN EN 60898-1:2006 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation (IEC 60898-1:2002, modified + A1:2002, modified); German version EN 60898-1:2003 + A1:2004 + Corrige

DIN EN 60947-2:2018 history

• 2020 DIN EN 60947-2:2020 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 60947-2:2016 + COR1:2016 + A1:2019); German version EN 60947-2:2017 + A1:2020
• 0000 DIN EN 60947-2/A1:2018
• 2015 DIN EN 60947-2 E:2015 Draft Document - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 121A/26/CDV:2014); German version FprEN 60947-2:2014
• 2014 DIN EN 60947-2:2014 Low-voltage switchgear and controlgear.Part 2: Circuit-breakers (IEC 60947-2:2006 + A1:2009 + A2:2013); German version EN 60947-2:2006 + A1:2009 + A2:2013