DIN EN ISO 12944-5:2018
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018); German version EN ISO 12944-5:2018

Standard No.

DIN EN ISO 12944-5:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 12944-5 E:2019

Latest

DIN EN ISO 12944-5:2020-03

Replace

DIN EN ISO 12944-5:2008 DIN EN ISO 12944-5:2017

Scope

This part of ISO 12944 describes the types of paint and paint system commonly used for corrosion protection of steel structures. It also provides guidance for the selection of paint systems available for different environments (see ISO 12944-2 except for Cx and Im4 corrosivity categories as defined in ISO 12944-2) and different surface preparation grades (see ISO 12944-4), and the durability grade to be expected (see ISO 12944-1). The durability of paint systems is classified in terms of low, medium, high and very high.

DIN EN ISO 12944-5:2018 Referenced Document

• ASTM D6580-17 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings*， 2024-04-20 Update
• DIN EN ISO 12944-1:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017); German version EN ISO 12944-1:2017
• DIN EN ISO 12944-2:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017); German version EN ISO 12944-2:2017
• DIN EN ISO 12944-4:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017); German version EN ISO 12944-4:2017
• DIN EN ISO 12944-6:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018); German version EN ISO 12944-6:2018
• DIN EN ISO 12944-9:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
• DIN EN ISO 1461:2009-10 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009); English version of DIN EN ISO 1461:2009-10
• DIN EN ISO 2063-1:2018 Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems
• DIN EN ISO 2063-2:2018 Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
• DIN EN ISO 2808:2007 Paints and varnishes - Determination of film thickness (ISO 2808:2007) English version of DIN EN ISO 2808:2007-05
• DIN EN ISO 3549:2002 Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995); German version EN ISO 3549:2002
• DIN EN ISO 4628-1:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016); German version EN ISO 46
• DIN EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016); German version EN ISO 4628-2:2016*， 2024-04-20 Update
• DIN EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016
• DIN EN ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016); German version EN ISO 4628-4:2016
• DIN EN ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016); German version EN ISO 4628-5:2016
• DIN EN ISO 4628-6:2011 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011); German version EN IS
• DIN EN ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou
• DIN EN ISO 8501-3:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006); English version of DIN
• DIN EN ISO 8503-1:2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
• EN 10238:2009 Automatically blast-cleaned and automatically prefabrication primed structural steel products

DIN EN ISO 12944-5:2018 history

• 2020 DIN EN ISO 12944-5:2020-03 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019); German version EN ISO 12944-5:2019
• 2020 DIN EN ISO 12944-5:2020 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)
• 1970 DIN EN ISO 12944-5 E:2019-07 Corrosion protection of structural steel components by paint and varnish protective coating systems Part 5: Protective coating systems (draft)
• 2019 DIN EN ISO 12944-5 E:2019 Draft Document - Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO/FDIS 12944-5:2019); German and English version prEN ISO 12944-5:2019
• 2018 DIN EN ISO 12944-5:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018); German version EN ISO 12944-5:2018
• 2008 DIN EN ISO 12944-5:2008 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2007); English version of DIN EN ISO 12944-5:2008-01
• 1998 DIN EN ISO 12944-5:1998 Coating materials – Corrosion protection of steel structures through coating systems – Part 5: Coating systems