GB/T 10183.1-2018 (English Version) PDF

Standard No.: GB/T 10183.1-2018
Language: Chinese, Available in English version
Release Date: 2018
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest: GB/T 10183.1-2018
Replace: GB/T 10183.1-2010

Scope: This part of GB/T 10183 specifies the tolerances in the installation and operating conditions of cranes and their tracks defined in ISO 4306-1. The purpose of putting forward these requirements in this part is to eliminate the overload caused by the normal size or shape deviation of the structure, so as to improve the operation safety of the crane and ensure that each component reaches its expected life. The tolerances specified in this section are limit values. This section does not apply to elastic deformation caused by load effects. In order to achieve the predetermined service performance requirements, other design criteria need to be considered in the design stage to consider these elastic deformations. Specific tolerance values for specific types of cranes are specified in other parts of GB/T 10183.

GB/T 10183.1-2018 Referenced Document

GB/T 1182-2008 Geometrical Product Specifications(GPS).Geometrical tolerancing.Tolerances of form,orientation,location and run-out
GB/T 1800.2-2009 Geometrical Product Specifications (GPS) Limits and fits--Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 6974.1-2008 Granes.Vocabulary.Part 1:General

2018 GB/T 10183.1-2018 Cranes.Tolerances for wheels and travel and traversing tracks.Part 1:General
2011 GB/T 10183.1-2010 Cranes.Tolerances for wheels and travel and traversing tracks.Part 1:General
2005 GB/T 10183-2005 Cranes.Overhead travelling cranes and portal bridge cranes.Tolerances for cranes manufacture and tracks laying
1988 GB/T 10183-1988 Cranes--Overhead travelling cranes and portal bridge cranes--Tolerances for cranes manufacture and tracks laying