DIN 582:2018
Lifting eye nuts

Standard No.
DIN 582:2018
Release Date
2018
Published By
German Institute for Standardization
Status
Replace By
DIN 582:2018-04
Latest
DIN 582:2023-11
Replace
DIN 582:2010 DIN 582:2017
Scope
This Standard specifies the characteristics and the marking of lifting eye nuts made of steel and of stainless steel and gives information on their correct use.

DIN 582:2018 Referenced Document

  • DIN 962:2013 Bolts, screws, studs and nuts - Designations, types and finishes
  • DIN EN 10084:2008 Case hardening steels - Technical delivery conditions; English version of DIN EN 10084:2008-06
  • DIN EN 10243-1:2000 Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999
  • DIN EN 10254:2000 Steel closed die forgings - General technical delivery conditions; German version EN 10254:1999
  • DIN EN 10263-5:2018-02 
  • DIN EN 818-4:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 (includes Amendment A1:2008); English version of DIN EN 818-4:2008-12
  • DIN EN ISO 10684:2011 Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008); German version EN ISO 10684:2004 + AC:2009
  • DIN EN ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003
  • DIN EN ISO 3269:2000 Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000
  • DIN EN ISO 3506-2:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009); German version EN ISO 3506-2:2009
  • DIN EN ISO 4042:2001 Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999
  • DIN EN ISO 6157-2:2004 Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004
  • DIN EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012); German version EN ISO 643:2012
  • DIN EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012
  • DIN ISO 965-1:2017 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013)
  • DIN ISO 965-5:2002 ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998)

DIN 582:2018 history

Lifting eye nuts


Copyright ©2024 All Rights Reserved