DIN EN 10084:2008
Case hardening steels - Technical delivery conditions; English version of DIN EN 10084:2008-06
- Standard No.
- DIN EN 10084:2008
- Release Date
- 2008
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN ISO 683-3:2018
- Latest
- DIN EN ISO 683-3:2018
- Replace
- DIN EN 10084:1998 DIN EN 10084:2006
- Scope
- 1.1 This European Standard gives the technical delivery requirements for: semi-finished products, hot formed, for example blooms, billets, slabs (see NOTE 2 and NOTE 3), bars (see NOTE 2), rod, wide flats, quarto plates, hot-rolled sheet/plate and strip, hammer and drop forgings (see NOTE 2), manufactured from the case hardening non alloyed or alloyed steels (see NOTE 4) listed in Table 3 and sup- plied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 7 and in one of the surface conditions given in Table 2. The steels are in general intended for the fabrication of case-hardened (see Clause 3) machine parts. NOTE I European Standards relating to steels complying with the requirements for the chemical composition in Ta- ble 3 but which are supplied in other product forms or treatment conditions than given above or are intended for special applications, and European Standards for similar steel grades are listed in the Bibliography. NOTE 2 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are included under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 3 Special agreements shall be made when ordering non-deformed continuously cast semi-finished products. NOTE 4 In accordance with EN 10020, the steels covered by this European Standard are special steels. 1.2 In special cases variations in these technical delivery requirements or additions to them may form the subject of an agreement at the time of enquiry and order (see Annex A). 1.3 In addition to the specifications of this European Standard, the general technical delivery requirements of EN 10021 are applicable, unless otherwise specified.
DIN EN 10084:2008 Referenced Document
- EN 10020 Definition and classification of grades of steel
- EN 10021 General technical delivery conditions for steel products*， 2024-04-19 Update
- EN 10027-1 Designation Systems for Steels - Part 1: Steel Names
- EN 10027-2 Designation systems for steels - Part 2: Numerical system*， 2015-04-01 Update
- EN 10052 Vocabulary of Heat Treatment Terms for Ferrous Products
- EN 10079 Definition of steel products
- EN 10160 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
- EN 10163-2 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: plate and wide flats*， 2024-04-19 Update
- EN 10204 Metallic products - Types of inspection documents*， 2024-04-19 Update
- EN 10221 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
- EN 10247:2007 Micrographic examination of the non-metallic inclusion content of steels using standard pictures
- EN 10308 Non destructive testing - Ultrasonic testing of steel bars*， 2024-04-19 Update
- EN ISO 14284 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022)*， 2022-11-16 Update
- EN ISO 377 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing*， 2017-07-01 Update
- EN ISO 642 Steel - Hardenability Test by End Quenching (Jominy Test) ISO 642: 1999
- EN ISO 643 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03)*， 2020-01-15 Update
- EN ISO 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method*， 2014-09-01 Update
- EN ISO 6508-1 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)*， 2023-12-20 Update
DIN EN 10084:2008 history
- 2018 DIN EN ISO 683-3:2018 Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2016); German version EN ISO 683-3:2018
- 2008 DIN EN 10084:2008 Case hardening steels - Technical delivery conditions; English version of DIN EN 10084:2008-06
- 1998 DIN EN 10084:1998 Case hardening steels - Technical delivery conditions; German version EN 10084:1998
- 1986 DIN 17210:1986 Case hardening steels; technical delivery conditions
