This draft standard specifies the characteristics and the marking of eye bolts made of steel and of stainless steel and gives information for the correct use. They can be used in a range of ambient temperature from -20 °C to +200 °C without any restriction with respect to their load capacity.
DIN 580:2018 Referenced Document
DIN 76-1:2016 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
DIN 962:2013 Bolts, screws, studs and nuts - Designations, types and finishes
DIN EN 10084:2008 Case hardening steels - Technical delivery conditions; English version of DIN EN 10084:2008-06
DIN EN 10243-1:2000 Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999
DIN EN 10254:2000 Steel closed die forgings - General technical delivery conditions; German version EN 10254:1999
DIN EN 26157-3:1991 Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
DIN EN 818-4:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 (includes Amendment A1:2008); English version of DIN EN 818-4:2008-12
DIN EN ISO 10684:2011 Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008); German version EN ISO 10684:2004 + AC:2009
DIN EN ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003
DIN EN ISO 3269:2000 Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000
DIN EN ISO 3506-1:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009); German version EN ISO 3506-1:2009
DIN EN ISO 4042:2001 Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999
DIN EN ISO 4753:2012 Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011); German version EN ISO 4753:2011
DIN EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012); German version EN ISO 643:2012
DIN ISO 965-1:2017 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013)
DIN ISO 965-4:2002 ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998)
DIN 580:2018 history
2023DIN 580:2023-11 Lifting eye bolts / Note: Date of issue 2023-09-29*Intended as replacement for DIN 580 (2018-04).