DIN EN ISO 24817:2018
Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017); English version EN ISO 24817:2017
- Standard No.
- DIN EN ISO 24817:2018
- Release Date
- 2018
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN ISO 24817:2018-03
- Latest
- DIN EN ISO 24817:2018-03
- Replace
- DIN EN ISO 24817:2015 DIN EN ISO 24817:2017
- Scope
- This document gives requirements and recommendations for the qualification and design, installation, testing and inspection for the external application of composite repair systems to corroded or damaged pipework, pipelines, tanks and vessels used in the petroleum, petrochemical and natural gas industries.
DIN EN ISO 24817:2018 Referenced Document
- ASTM C581-15 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service*， 2024-04-20 Update
- ASTM D1598-15 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure*， 2024-04-20 Update
- ASTM D1599-14 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings*， 2024-04-20 Update
- ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor*， 2024-04-20 Update
- ASTM D2992-12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings*， 2024-04-20 Update
- ASTM D3165-07 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies*， 2024-04-20 Update
- ASTM D3681-12 Standard Test Method for Chemical Resistance of ldquo;Fiberglassrdquo; (Glassndash;Fiberndash;Reinforced Thermosetting-Resin) Pipe in a Deflected Condition*， 2024-04-20 Update
- ASTM D5379/D5379M-12 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method*， 2024-04-20 Update
- ASTM D543-14 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents*， 2024-04-20 Update
- ASTM D6604-00 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry*， 2024-04-20 Update
- ASTM D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between &x2212;30&xb0;C and 30&xb0;C with a Vitreous Silica Dilatometer*， 2024-04-20 Update
- ASTM E1640-13 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis*， 2024-04-20 Update
- ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis*， 2024-04-20 Update
- ASTM E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis*， 2024-04-20 Update
- ASTM G8-96 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
- DIN EN ISO 11357-2:2014 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013), German version EN ISO 11357-2:2014
- DIN EN ISO 14692-1:2018 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017); English version EN ISO 14692-1:2017
- DIN EN ISO 14692-2:2018 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017); English version EN ISO 14692-2:2017
- DIN EN ISO 14692-3:2018 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017); English version EN ISO 14692-3:2017
- DIN EN ISO 14692-4:2018 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017); English version EN ISO 14692-4:2017
- DIN EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012); German version EN ISO 527-1:2012
- DIN EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997
- DIN EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004
- DIN EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
- EN 59 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
DIN EN ISO 24817:2018 history
- 2018 DIN EN ISO 24817:2018-03 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017); English version EN ISO 24817:2017
- 2018 DIN EN ISO 24817:2018 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017); English version EN ISO 24817:2017
- 2015 DIN EN ISO 24817:2015 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2015); English version EN ISO 24817:2015
- 1970 DIN EN ISO 24817 E:2014-07 Quality qualification and design, installation, testing and inspection of repairs of composite materials for pipeline works in the petroleum, petrochemical and gas industries (Draft)
- 0000 DIN EN ISO 24817:2014
- 2011 DIN CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006); English version CEN ISO/TS 24817:2011
