DIN EN ISO 14692-1:2018
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017); English version EN ISO 14692-1:2017

Standard No.

DIN EN ISO 14692-1:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 14692-1:2018-02

Latest

DIN EN ISO 14692-1:2018-02

Replace

DIN EN ISO 14692-1:2005 DIN EN ISO 14692-1:2015

Scope

This document defines the applications, pressure rating methodology, the classification of the products according to application, type of joint and resin matrix and the limitations to both the materials of construction and the dimensions. It also lists the terms, definitions and symbols used and provides guidance in the use and interpretation of ISO 14692-2, ISO 14692-3 and ISO 14692-4. ISO 14692 (all parts) is applicable to GRP piping systems that 1) utilize joints that are capable of restraining axial thrust from internal pressure, temperature change and fluid hydrodynamic forces and 2) have a trapezoidal shape for its design envelope. It is primarily intended for offshore applications on both fixed and floating topsides facilities, but it can also be used for the specification, manufacture, testing and installation of GRP piping systems in other similar applications found onshore, e. g. produced-water, firewater systems and general industrial use. For floating installations, reference is made to the design, construction and certification standards for the hull or vessel, since these can allow alternative codes and standards for GRP piping associated with marine and/or ballast systems. However, it is recommended that ISO 14692 (all parts) be used for such applications to the maximum degree attainable. ISO 14692 (all parts) can also be used as the general basis for specification of pipe used for pump caissons, stilling tubes, I-tubes, seawater lift risers and other similar items.

DIN EN ISO 14692-1:2018 Referenced Document

• ASTM D2992-12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings*， 2024-04-20 Update
• ASTM D3262-16 Standard Specification for &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe*， 2024-04-20 Update
• ASTM D3517-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pressure Pipe*， 2024-04-20 Update
• ASTM D3754-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Sewer and Industrial Pressure Pipe*， 2024-04-20 Update
• DIN EN ISO 14692-2:2018 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017); English version EN ISO 14692-2:2017
• DIN EN ISO 14692-3:2018 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017); English version EN ISO 14692-3:2017
• DIN EN ISO 14692-4:2018 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2017); English version EN ISO 14692-4:2017
• EN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes@ fittings and joints
• EN 1796:2013 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
• ISO 10467:2004 Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
• ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
• ISO 14692-2:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
• ISO 14692-3:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
• ISO 14692-4:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation

DIN EN ISO 14692-1:2018 history

• 2018 DIN EN ISO 14692-1:2018-02 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017); English version EN ISO 14692-1:2017
• 2018 DIN EN ISO 14692-1:2018 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017); English version EN ISO 14692-1:2017
• 2005 DIN EN ISO 14692-1:2005 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002