ASTM C1116/C1116M-10a(2015)
Standard Specification for Fiber-Reinforced Concrete

Standard No.
ASTM C1116/C1116M-10a(2015)
Release Date
2010
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM C1116/C1116M-23
Latest
ASTM C1116/C1116M-23
Scope

1.1 This specification covers all forms of fiber-reinforced concrete that are delivered to a purchaser with the ingredients uniformly mixed, and that can be sampled and tested at the point of delivery. It does not cover the placement, consolidation, curing, or protection of the fiber-reinforced concrete after delivery to the purchaser.

1.2 Certain sections of this specification are also applicable to fiber-reinforced concrete intended for shotcreting by the dry-mix process when sampling and testing of concrete is possible only at the point of placement. In this case, the sections dealing with batching plant, mixing equipment, mixing and delivery, and measurement of workability and air content, are not applicable.

1.3 This specification does not cover thin-section glass fiber-reinforced concrete manufactured by the spray-up process that is under the jurisdiction of ASTM Subcommittee C27.40.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5 The following precautionary statement pertains only to the test method portion, Sections 15 and 18, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM C1116/C1116M-10a(2015) Referenced Document

  • ASTM A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
  • ASTM C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
  • ASTM C1140 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
  • ASTM C125 Standard Terminology Relating to Concrete and Concrete Aggregates
  • ASTM C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • ASTM C1385/C1385M Standard Practice for Sampling Materials for Shotcrete
  • ASTM C1399 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
  • ASTM C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete
  • ASTM C1436 Standard Specification for Materials for Shotcrete
  • ASTM C1480 Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
  • ASTM C150 Standard Specification for Portland Cement
  • ASTM C1550 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)*， 2024-04-20 Update
  • ASTM C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
  • ASTM C1604/C1604M Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
  • ASTM C1609/C1609M Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
  • ASTM C1666/C1666M Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
  • ASTM C172 Standard Practice for Sampling Freshly Mixed Concrete
  • ASTM C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
  • ASTM C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
  • ASTM C231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field
  • ASTM C387 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
  • ASTM C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
  • ASTM C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
  • ASTM C567 Standard Test Method for Determining Density of Structural Lightweight Concrete
  • ASTM C666/C666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing*， 2024-04-20 Update
  • ASTM C684 Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
  • ASTM C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
  • ASTM C94/C94M Standard Specification for Ready-Mixed Concrete
  • ASTM D6942 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
  • ASTM D7357 Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete
  • ASTM D7508/D7508M Standard Specification for Polyolefin Chopped Strands for Use in Concrete

ASTM C1116/C1116M-10a(2015) history

Standard Specification for Fiber-Reinforced Concrete


Copyright ©2024 All Rights Reserved