DIN EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking; German version EN 303-1:2017
This European Standard applies to boilers used for central heating (heating boilers) with forced draught burners with a nominal heat output not exceeding 1000 kW, which are operated either with negative pressure (natural draught boilers) or with positive pressure (pressurized boiler) in the combustion chamber, in accordance with the boiler manufacturers instruction. This standard specifies the necessary terminology, the requirements on the materials and testing of them, and marking requirements for heating boilers. Particular requirements for boilers that can be used with open vented systems are contained in EN 3034. The requirements of this standard apply to heating boilers that are tested on an authorized test rig. Boilers in accordance with this standard are designed for the heating of central heating installations in which the heat carrier is water, and the maximum allowable operating temperature of which is restricted to 100 °C. The maximum allowable operating pressure is 8 bar. For boilers (storage or continuous flow heater) this standard only applies to the parts of the water heater that are necessarily subject to the operating conditions of the heating boiler (heating part). This standard does not apply to gas boilers with atmospheric burners, boilers for solid fuels, boilers and boilers with oil vaporization burners. For these boilers there are further requirements.
DIN EN 303-1:2017 Referenced Document
EN 10021:2006 General technical delivery conditions for steel products*, 2024-04-20 Update
EN 10025-2:2004 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels*, 2024-04-20 Update
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels*, 2024-04-20 Update
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels@ normalized
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape*, 2024-04-20 Update
EN 10088-2:2014 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10204:2004 Metallic products - Types of inspection documents*, 2024-04-20 Update
EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements (Incorporating corrigendum February 2016)
EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
EN 15034:2006 Heating boilers - Condensing heating boilers for fuel oil*, 2024-04-20 Update
EN 15035:2006 Heating boilers - Special requirements for oil fired room sealed units up to 70 kW*, 2024-04-20 Update
EN 15456:2008 Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements
EN 226:1987 Atomizing Oil Burners: Connecting Dimensions Between Burners and Heat Generators
EN 303-2:2017 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
EN 303-4:1999 Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and ma
EN 303-6:2000 Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
EN 304:2017 Heating boilers - Test code for heating boilers for atomizing oil burners*, 2017-11-01 Update
EN 60335-1:2012 Safety of household and similar electrical appliances. Part 1: General requirements; includes modifications A11-1995; modifications A12-1996; modifications A13-1998; modifications A14-1998; modifications A15-2000; modifications A16- 2001; Modification A2-
EN 60529:1991 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
EN 60730-1:2011 Automatic electrical controls for household and similar use - Part 1: General requirements*, 2024-04-20 Update
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls*, 2024-04-20 Update
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments (Incorporates Amendment A1: 2011)
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)*, 2024-04-20 Update
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method
EN ISO 6506-2:2014 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014)
EN ISO 6506-3:2014 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
EN ISO 6506-4 Metallic materials - Brinell hardness test - Part 4: Table of hardness values
DIN EN 303-1:2017 history
2017DIN EN 303-1:2017-11 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking; German version EN 303-1:2017
2017DIN EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking; German version EN 303-1:2017
2003DIN EN 303-1:2003 Heating boilers - Part 1: Heating boilers with forced draught burners; Terminology, general requirements, testing and marking (includes Amendment A1:2003); German version DIN EN 303-1:1999 + A1:2003
1998DIN EN 303-1:1999 Heating boilers — Part 1: Heating boilers with forced draft burners — Terminology, general requirements, testing and marking
0000 DIN EN 303-1:1992
1990DIN 4702-1:1990 Boilers for central heating; terms, requirements, testing, marking