BS EN ISO 24817:2017 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
ASTM C581-15 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service*， 2023-12-23 Update
ASTM D1598-15A Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure*， 2023-12-23 Update
ASTM D1599-14E1 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings*， 2023-12-23 Update
ASTM D2344/D2344M-16 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates*， 2023-12-23 Update
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor*， 2023-12-23 Update
ASTM D2992-12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings*， 2023-12-23 Update
ASTM D3039/D3039M-14 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials*， 2023-12-23 Update
ASTM D3165-07(2014) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies*， 2023-12-23 Update
ASTM D3681-12e1 Standard Test Method for Chemical Resistance of ldquo;Fiberglassrdquo; 40;Glassndash;Fiberndash;Reinforced Thermosetting-Resin41; Pipe in a Deflected Condition*， 2023-12-23 Update
ASTM D5379/D5379M-12 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method*， 2023-12-23 Update
ASTM D543-14 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents*， 2023-12-23 Update
ASTM D6604-00(2013) Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry*， 2023-12-23 Update
ASTM D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between &x2212;30&xb0;C and 30&xb0;C with a Vitreous Silica Dilatometer*， 2023-12-23 Update
ASTM E1640-13 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis*， 2023-12-23 Update
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis*， 2023-12-23 Update
ASTM E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis*， 2023-12-23 Update
ASTM E84-17 Standard Test Method for Surface Burning Characteristics of Building Materials*， 2023-12-23 Update
ASTM G8-96(2010) Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
ISO 10952:2014 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack for the inside of a section in a deflected condition
ISO 11357-2:2013 Plastics-Differential scaming calorimetery(DSC)-Past 2:Determination of glass transition temperature and glass transition step height*， 2023-12-23 Update
ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 14692 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN ISO 24817:2017 history
0000 BS EN ISO 24817:2017(2018)
2017BS EN ISO 24817:2017 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
2015BS EN ISO 24817:2015 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
2007BS DD CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection